Skip to content
MeasureToBuy

Interior Paint Calculator

Estimate every interior product at once: wall paint, ceiling paint and trim paint, room by room. Each is rounded to the cans you'll actually buy, because they're usually three different products.

Measurements

Floor to ceiling.

Coats

Recommended

Extra paint

Covers absorption, roller loss and touch-ups.

Advanced optionscoverage, sizes, custom values
sq ft/gal

Printed on the can. Most wall paints list 250–400 sq ft per gallon (about 6–10 m² per litre).

A standard 3 × 7 ft door is 21 sq ft.

A typical 3 × 5 ft window is 15 sq ft.

Your estimate

You need about 3 gallons of wall paint.

2.09 gal calculated for 365 sq ft at 2 coats, plus 10% extra.

Wall area
416 sq ft
Doors & windows
-51 sq ft
Paintable wall area
365 sq ft
Coats
2 coats
Coverage
350 sq ft/gal
Extra
10%
Wall paint calculated
2.09 gal
Wall paint with 10% extra
2.29 gal
Buy3 × 1-gal can
3 gal

Ceiling

Ceiling area
168 sq ft
Ceiling paint calculated
0.96 gal
Ceiling paint with 10% extra
1.06 gal
Buy2 × 1-gal can
2 gal
Or, to minimise leftovers
1 gal + 1 qt

Trim

Trim area (2 coats)
27 sq ft
Trim paint calculated
0.62 qt
BuySemi-gloss is usual for trim.
1 qt
Walls, unfolded
WALL A14 ftWALL B12 ftWALL C14 ftWALL D12 ft8 ft8 ft
Wall area = 2 × (14 ft + 12 ft) × 8 ft. Doors (solid) and windows (dashed) are subtracted.

Next step

Plan the whole project

Walk through measurements, paint, primer and cost step by step, then print a shopping list.

Start the Paint a Room project

Also useful

Estimate the cost

You need approximately 3 gal of wall paint. Add prices to see the material cost.

Estimate paint cost

How to measure

  1. For each room, measure length and width along the floor and the wall height from floor to ceiling.
  2. Count doors and windows in each room. Doors also set how much door casing gets trim paint.
  3. Measure baseboard height if it's taller than the usual 4 in (Advanced options).
  4. Turn off the ceiling or trim if you're not painting them this time.

How the interior paint calculation works

Walls    = 2 × (length + width) × height − doors − windows
Ceiling  = length × width
Trim     = perimeter × baseboard height + doors × 2 sides × 17 ft × 3½ in casing
Paint    = area × coats ÷ coverage   (trim always 2 coats)
Buy      = paint × (1 + extra %), rounded to cans — trim in quarts

Walls are the room's perimeter times its height, minus 21 sq ft per door and 15 sq ft per window. The ceiling matches the floor area.

Trim is narrow but adds up: baseboards run the whole perimeter, and each door has casing on both faces. Trim gets two coats of a harder semi-gloss, and because the amounts are small, it's rounded to quarts (or 1 L tins) instead of gallons.

Each product is rounded separately, since leftover ceiling white can't finish the walls.

Worked example

A 12 × 10 ft bedroom with 8 ft ceilings, one door and one window, painting walls, ceiling and trim with two coats and 10% extra.

  1. Walls: 2 × (12 + 10) × 8 = 352 − 21 − 15 = 316 sq ft → 316 × 2 ÷ 350 = 1.81 gal × 1.1 = 1.99 gal
  2. Ceiling: 12 × 10 = 120 sq ft → 120 × 2 ÷ 350 = 0.69 gal × 1.1 = 0.75 gal
  3. Trim: 44 ft × 4 in = 14.7 sq ft + 2 × 17 ft × 3½ in = 9.9 sq ft → 24.6 sq ft × 2 ÷ 350 = 0.14 gal × 1.1 = 0.15 gal (0.62 qt)

Buy 2 gallons of wall paint, 1 gallon of ceiling paint and 1 quart of semi-gloss trim paint.

How much extra to allow

The same extra applies to each product. Trim waste is mostly in the brush and the tin — buying by the quart keeps it small.

SituationAllow
Repaint, same color5–10%
Color change or several rooms10%
New drywall, textured surfaces15%

Reading your result

The headline is wall paint. The Ceiling and Trim tables below it each have their own 'Buy' line.

Adding rooms to one estimate rounds each product once across the house, which usually saves a can.

Doors themselves aren't included — a door slab takes about a quart per side for two coats.

Assumptions

  • Coverage of 350 sq ft per gallon for all three products; change it under Advanced options if your labels differ.
  • Doors are 21 sq ft and windows 15 sq ft. Window casings and sills aren't counted as trim.
  • Baseboards are 4 in high; each door has about 17 ft of 3½ in casing per side.
  • Walls and ceilings are smooth and previously painted. Use the Primer Calculator for new drywall.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Whole-house interiors with high ceilings, stairwells or extensive trim are often faster and safer with a crew.
  • Homes built before 1978 may have lead paint on trim and windows. Test before sanding.

Frequently asked questions

How much paint do I need for a whole house interior?

Add each room here. As a rough guide, walls take about 1 gallon per 175 sq ft of wall for two coats; a 2,000 sq ft home often needs 15–20 gallons of wall paint plus ceiling and trim.

How much paint do I need for baseboards?

Very little: 100 ft of 4 in baseboard is about 33 sq ft, under a quart for two coats. Buy trim paint by the quart unless you're doing several rooms.

Should ceilings and walls use the same paint?

Usually not. Ceiling paint is flat and spatter-resistant; walls typically get eggshell or satin. That's why they're estimated and rounded separately.

Do I need different paint for trim?

Trim takes knocks and cleaning, so semi-gloss or gloss enamel is standard. It's a separate product, estimated in quarts here.

More painting calculators

All painting