Skip to content
MeasureToBuy

Caulk Calculator

Enter the joints you'll caulk and the bead size. You'll get how far one tube goes and how many 10.1 oz tubes to buy.

Measurements

Bead size

Tubs, counters

Waste allowance

Rule of thumb for tooling, nozzle cleanup and what's left in the tube.

Your estimate

You need 1 tube of caulk (10.1 oz cartridges).

One 10.1 oz tube runs about 55 ft at a 0.19 in bead.

Joint length
50 ft
Bead
0.19 in
Length per tube
55 ft
Waste allowance
10%
10.1 oz tubes
1 tube
  • Fill deep or wide gaps with foam backer rod first, so the caulk bonds to the two sides only — it lasts longer and uses far less caulk.

Next step

Running baseboard first?

Work out baseboard pieces for the room.

Baseboard calculator

How to measure

  1. Measure each joint: the top of the baseboard, around window and door trim, along a tub or counter.
  2. Pick the bead size: about ⅛ in for trim, 3/16 in for tubs and counters, ¼ in or more for exterior gaps.
  3. Cut the nozzle to that size — the cut decides how much comes out.

How the caulk calculation works

Length per tube = tube volume ÷ bead cross-section
Round bead      = π × diameter² ÷ 4
Tubes           = joint length × (1 + waste) ÷ length per tube

A 10.1 fl oz cartridge holds about 18.2 cu in. Divide that by the area of the bead and you get how far it runs: about 55 ft at a 3/16 in bead (the figure DAP gives), 124 ft at ⅛ in, 31 ft at ¼ in and 8 ft at ½ in.

Doubling the bead size uses four times the caulk, because the area goes with the square of the diameter.

Worked example

200 ft of joints at a 3/16 in bead with 10% waste.

  1. Per tube: 18.23 cu in ÷ (π × 0.1875² ÷ 4 = 0.0276 sq in) = 660 in = 55 ft
  2. Length with waste: 200 × 1.10 = 220 ft
  3. Tubes: 220 ÷ 55 = 4.0 → 4 tubes (buy a spare)

Buy 4–5 tubes of caulk.

How much extra to allow

Tooling the bead wipes some away and a little stays in the nozzle and tube. Wide or irregular gaps vary the most.

SituationAllow
Trim and baseboard10%
Irregular exterior gaps20%

Reading your result

Tubes to buy is your order — caulk is cheap, so round up.

Use paintable caulk on trim and 100% silicone or a kitchen-and-bath sealant in wet areas.

Assumptions

  • A round bead; a triangular fillet in a corner uses somewhat less.
  • 10.1 fl oz standard cartridges.
  • Waste is a rule of thumb for tooling and what stays in the tube.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

Frequently asked questions

How many feet does a tube of caulk cover?

A 10.1 oz tube runs about 55 ft at a 3/16 in bead, 124 ft at ⅛ in and 31 ft at ¼ in.

How much caulk do I need for baseboards?

Measure the total baseboard length. At a ⅛ in bead a tube covers about 124 ft, so a 50 ft room needs one tube with plenty to spare.

Should I use backer rod?

Yes for deep or wide gaps. Foam backer rod fills the depth so the caulk bonds only to the two sides, which lets it stretch and uses far less caulk.

More painting calculators

All painting