Skip to content
MeasureToBuy

Paint Coverage Calculator

Two questions, one tool. Find how much area the paint you already have will cover, or — after a job — work out the coverage you actually got, so your next estimate is spot on.

Measurements

What do you want to know?

I have paint — how far will it go?

sq ft/gal

Most wall paints list 250–400 sq ft per gallon. Use the low end on rough or porous surfaces.

Coats

Recommended

Your estimate

Your paint covers about 175 square feet at 2 coats.

1 gal × 350 sq ft/gal ÷ 2 coats.

Paint
1 gal
Coverage
350 sq ft/gal
One coat covers
350 sq ft
Coats
2 coats
Area you can paint
175 sq ft
  • Label coverage assumes smooth, primed walls. Hold back 10% or so for roller loss and touch-ups.

Next step

Estimate a whole room

Use your coverage figure in the Paint Calculator (Advanced options) for a tighter estimate.

Open the Paint Calculator

How to measure

  1. For 'Area my paint will cover', note how much paint you have (gallons, quarts or liters) and the coverage printed on the can.
  2. For 'Coverage I actually got', measure the area you painted (length × height of each wall, minus doors and windows) and how much paint you used.
  3. Count coats. Two coats over the same area uses twice the paint.

How the paint coverage calculation works

Area covered     = paint × coverage ÷ coats
Actual coverage  = area painted × coats ÷ paint used

Coverage is a spread rate: square feet per gallon for one coat. Multiply it by the paint you have to get one coat's worth of area, then divide by the coats you plan.

Run it backwards after a job: total area coated (area × coats) divided by paint used gives your real spread rate. Most wall paints land between 250 and 400 sq ft per gallon; texture, porous surfaces and thick-nap rollers push it lower.

Worked example

You have one gallon of wall paint rated at 350 sq ft per gallon and want two coats. Later you paint 400 sq ft of wall with two coats and use 2 gallons.

  1. Area covered: 1 × 350 ÷ 2 = 175 sq ft
  2. Actual coverage: 400 × 2 ÷ 2 = 400 sq ft per gallon

One gallon covers about 175 sq ft at two coats — an accent wall, not a bedroom. A 400 sq ft per gallon result is at the top of the normal range, so check for thin spots once it dries.

Reading your result

In area mode, the highlighted number is the most wall you can paint at your chosen coats. Compare it with your wall area before you start.

In coverage mode, a result well below 250 sq ft per gallon means rough or thirsty walls — use your number, not the label's, in the Paint Calculator's Advanced options next time.

Assumptions

  • Coverage is per coat, as printed on the can.
  • Area covered doesn't include extra for roller loss and touch-ups — keep about 10% back.
  • One US gallon is 3.785 liters; one quart is a quarter gallon.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

Frequently asked questions

How many square feet does a gallon of paint cover?

Most interior wall paints cover 250–400 sq ft per gallon per coat; 350 is a good middle figure. Two coats halve that, to about 175 sq ft per gallon.

How much does a quart of paint cover?

A quarter of a gallon: about 85–100 sq ft for one coat at typical coverage, or roughly 45 sq ft at two coats — enough for a door or a small accent wall.

Why did my paint cover less than the can says?

Label coverage assumes smooth, primed, non-porous walls. Texture, new drywall, bare plaster, thick-nap rollers, spraying and deep colors all reduce it — often by 20–40%.

How many liters of paint per square meter?

At a typical 9–10 m² per liter, one coat uses about 0.1 L per m², and two coats about 0.2 L per m².

More painting calculators

All painting