How to measure
- Measure the width of every wall you'll paper and add them up. For a whole room, that's the perimeter.
- Measure wall height from the top of the baseboard (or the floor) to the ceiling, at the tallest point.
- Count doors and windows and note their widths — standard is about 3 ft.
- Read the roll width, roll length and pattern repeat from the label. Random-match papers and plains have a repeat of 0.
How the wallpaper calculation works
Strip length = height + trim, rounded up to whole pattern repeats Strips per roll = roll length ÷ strip length, rounded down Width to paper = wall width − 50% of door and window widths Strips = width to paper ÷ roll width, rounded up Rolls = strips ÷ strips per roll, rounded up
Every strip has to start at the same point in the pattern so it lines up with its neighbor. That means each strip uses a whole number of repeats, even if the wall only needs part of the last one. Add about 4 in for trimming at the ceiling and baseboard first, then round up.
A roll only yields whole strips — the piece left at the end is an offcut. That's why a big repeat can drop a roll from three strips to two and add 50% to the order, and why estimating by square footage under-orders.
Doors and windows are only half-deducted. The strips above a door and above and below a window still need full-width paper, and offcuts rarely cover all of them.
Worked example
A bedroom with 48 ft of wall, 8 ft high, one door and two windows (3 ft wide each), a 21 in pattern repeat and US double rolls (20.5 in × 33 ft).
- Strip length: 96 + 4 = 100 in → 5 repeats × 21 = 105 in
- Strips per roll: 396 in ÷ 105 = 3.77 → 3 strips
- Width to paper: 48 − (3 + 6) × 50% = 43.5 ft = 522 in
- Strips: 522 ÷ 20.5 = 25.5 → 26 strips
- Rolls: 26 ÷ 3 = 8.67 → 9 double rolls
Buy 9 double rolls, all from the same batch. About 2 ft is left on each roll — use it above the door and under the windows.
How much extra to allow
The strip method already includes the real waste: roll ends and pattern matching. Add a spare roll for expensive or hard-to-reorder papers — later batches rarely match exactly.
| Situation | Allow |
|---|---|
| Random match or plain paper | No spare needed |
| Patterned paper, simple room | 1 spare roll |
| Large repeat, many corners or a stairwell | 1–2 spare rolls |
Reading your result
The highlighted number is the rolls to buy. 'Strips per roll' is the key figure — if it's low, a narrower repeat or a longer roll changes the order a lot.
US wallpaper is usually priced per single roll but sold in double rolls. Check which one a price refers to before comparing.
Check the batch (run) number on every roll before you start hanging.
Assumptions
- US double roll: 20.5 in × 33 ft. Euro roll: 0.53 × 10.05 m. Use 'Other size' for anything else, including wide commercial goods.
- 4 in trim per strip (2 in at each end), adjustable under Advanced options.
- Openings deduct half their width; door and window widths default to 3 ft (0.9 m).
- Straight and drop-match papers are both rounded to whole repeats per strip.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Grasscloth, silk, hand-printed and very expensive papers are usually worth a professional hanger — mistakes are costly.
- Stairwells and ceilings need scaffolding and experience.
- Damp walls or crumbling plaster need repair before papering, or the paper will lift.
Frequently asked questions
How many rolls of wallpaper do I need for a 12 × 12 room?
With 8 ft walls, a door and a window, about 9 US double rolls for a paper with a 21 in repeat. Random-match papers can need fewer; large repeats more.
What is a pattern repeat?
The vertical distance before the pattern starts again, printed on the label. Strips must start at the same point in the pattern, so each strip uses a whole number of repeats.
Why not just divide the wall area by the roll area?
Because rolls are cut into full-height strips and the leftover at the end of each roll is waste. Area-based estimates typically come up one or two rolls short.
What's the difference between a single and a double roll?
A US double roll is two single rolls on one tube — about 56 sq ft versus 28 sq ft. Most US papers are priced per single roll but sold as doubles, which also gives longer continuous lengths and less waste.