How to measure
- Measure the tiled area: length × width of the floor, or width × height of the wall.
- Measure one tile's length and width, and its thickness (the joint depth).
- Use the joint width set by your spacers — ⅛ in (3 mm) is common; rectified tile often uses 1/16 in.
How the grout calculation works
Tiles in the area = area ÷ ((tile length + joint) × (tile width + joint)) Grout volume = tiles × joint × (length + width) × depth Grout weight = volume × 1,600 kg/m³ (≈ 100 lb/cu ft) × (1 + waste)
Each tile has one joint along its length and one along its width. Multiply that joint area by the depth to get the grout volume, then by the density of the dry powder to get the weight you buy.
Small tiles have far more joint per square foot, so a mosaic floor can use ten times the grout of a large-format tile floor.
Worked example
A 8 × 5 ft floor in 12 × 12 in tile, ⅜ in thick, with ⅛ in joints and 10% extra.
- Area: 40 sq ft = 5,760 sq in; tiles: 5,760 ÷ (12.125 × 12.125) = 39.2
- Grout volume: 39.2 × 0.125 × 24 × 0.375 = 44.1 cu in
- Weight: 44.1 cu in ≈ 722 cm³ × 1.6 g = 1.16 kg (2.5 lb); with 10% = 2.8 lb
About 2.8 lb of non-sanded grout — one bag is plenty.
How much extra to allow
Grout is mixed in batches and some is always left on the float and in the bucket. Unglazed quarry tile and textured surfaces hold extra on the face.
| Situation | Allow |
|---|---|
| Glazed tile, ⅛ in joints | 10% |
| Unglazed quarry or textured tile | 15–20% |
Reading your result
The bag row is what to buy. If you're between bags, the smaller bag is usually enough for touch-ups.
Mix only what you can grout in about 20–30 minutes, or follow the bag's working time.
Assumptions
- Dry grout powder density about 1,600 kg/m³; for 12 × 12 in tile this lands close to Custom's Polyblend Plus coverage chart.
- Joints are filled to the tile's full thickness.
- Non-sanded grout for joints up to ⅛ in and sanded for ⅛–½ in, following the Custom Polyblend Plus data sheet. Mapei Keracolor S allows up to ⅝ in.
- 10% extra is customary for jobsite waste (LATICRETE Grout Guide).
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
Frequently asked questions
How much grout do I need for 100 sq ft?
For 12 × 12 in tile with ⅛ in joints and ⅜ in thickness, about 6.4 lb before waste. Custom's Polyblend Plus chart says a 25 lb bag covers 348 sq ft of that tile.
Sanded or unsanded grout?
Non-sanded for joints up to ⅛ in, sanded for wider joints — Custom Polyblend Plus sanded is rated for ⅛–½ in.
Why do small tiles need so much more grout?
Joint length per square foot grows as tiles shrink. 1 × 1 in mosaics have 24 linear feet of joint per square foot; 12 × 12 in tiles have just 2.