Skip to content
MeasureToBuy

Bathroom Tile Calculator

Estimate a bathroom floor and its tub surround or shower walls in one go, each with its own tile size, grout joint, waste and box size. You get boxes for each tile and a combined total.

Measurements

The tiled floor outside the tub or shower.

⅛ in (3 mm) is common; 1/16 in for rectified tile.

Floor waste allowance

Cuts at walls, offcuts and the occasional damaged board. Use more for small or irregular rooms.

On the box label. Leave as is if buying loose tiles.

Wet area walls

Back wall and two end walls above the tub

The back wall: a standard tub is 5 ft (1.5 m).

Each end wall is this wide.

From the tub rim to the top of the tile.

1/16 in (1.5 mm) is typical for subway tile.

Wall waste allowance

On the box label.

Advanced optionscoverage, sizes, custom values

Used for the grout estimate.

Your estimate

You need 9 boxes of tile — 3 for the floor and 6 for the walls.

27.5 sq ft of floor and 60 sq ft of wall, each with its own tile and waste allowance.

Floor area
27.5 sq ft
Tub surround area
60 sq ft
Floor tile30 tiles
3 boxes
Wall tile512 tiles
6 boxes

Floor

Area to tile
27.5 sq ft
Tile size
12 in × 12 in
Tiles to cover the area0.98 tiles per sq ft with joints
27 tiles
Waste allowance
10%
Tiles to buy
30 tiles
Boxes of 1030 sq ft of tile
3 boxes
Grout, approximately1 × 25 lb bag
1.8 lb

Tub surround

Area to tile
60 sq ft
Tile size
3 in × 6 in
Tiles to cover the area7.76 tiles per sq ft with joints
466 tiles
Waste allowance
10%
Tiles to buy
512 tiles
Boxes of 10075 sq ft of tile
6 boxes
Grout, approximately1 × 25 lb bag
5.7 lb
  • Walls behind a tub need cement board or a waterproofing membrane, not plain drywall.
  • Joints under ⅛ in take unsanded grout; ⅛ in and wider take sanded grout. Floor and walls may need different bags.
Tile layout
5.5 ft5 ftTILE 12 in × 12 in · JOINT 0.125 in
6 tiles across × 5 down in a straight lay. Shaded tiles along the edges are cut pieces.

Next step

Price the floor with setting materials

Add thinset, grout and cement backer board to the floor tile cost.

Estimate tile cost

Also useful

Tiling a vanity backsplash too?

Estimate tile or mosaic sheets for a counter run, minus outlets and mirrors.

Backsplash calculator

How to measure

  1. Floor: measure the tiled floor outside the tub or shower. Leave out the vanity footprint if it won't sit on tile.
  2. Tub surround: measure the tub length (the back wall), the tub depth (each end wall) and how high the tile goes above the tub rim — 6 ft is typical for a shower over a tub.
  3. Walk-in shower: measure the back wall width, the side wall depth and the tile height from the shower floor.
  4. Read the tiles per box from each product's label. Floor and wall tile are almost always sold in different box sizes.

How the bathroom tile calculation works

Floor area     = length × width
Tub walls      = (tub length + 2 × tub depth) × height above tub
Shower walls   = (width + 2 × depth) × height
Tiles          = area ÷ ((tile w + joint) × (tile h + joint)) × (1 + waste %), rounded up
Boxes          = tiles ÷ tiles per box, rounded up — floor and walls separately

A tub alcove has three tiled walls: the long back wall the length of the tub, and two short end walls as deep as the tub. A three-wall shower is the same shape, tiled from the floor.

Each surface uses its own tile size and joint, so the joint is included in each tile's footprint before dividing. Small wall tile with thin joints packs about 7.8 tiles into a square foot; 12 × 12 floor tile is just under one.

Floor and wall boxes are rounded separately because they're different products. The headline adds them so you know how many boxes to load.

Worked example

A 5.5 × 5 ft floor in 12 × 12 in tile (⅛ in joints, 10 per box) and a standard 5 ft × 30 in tub alcove tiled 6 ft high in 3 × 6 in subway (1/16 in joints, 100 per box), 10% waste on each.

  1. Floor: 5.5 × 5 = 27.5 sq ft ÷ 1.021 sq ft per tile = 26.9 × 1.1 = 29.6 → 30 tiles → 3 boxes
  2. Tub walls: (5 + 2 × 2.5) × 6 = 60 sq ft
  3. Subway tile with joint: 3.0625 × 6.0625 = 18.57 sq in = 0.129 sq ft
  4. Walls: 60 ÷ 0.129 = 465.4 × 1.1 = 511.9 → 512 tiles → 6 boxes

Buy 9 boxes: 3 of floor tile and 6 of wall tile. The sixth wall box is mostly spare — keep it for repairs.

How much extra to allow

Bathrooms waste more tile than open floors: small areas, toilet flanges, niches and the tub edge all need cuts.

SituationAllow
Floor, straight lay10%
Floor, diagonal or large-format tile15%
Walls, straight or running bond10%
Walls with niches, or herringbone15–20%

Reading your result

The highlighted rows are the boxes to buy of each tile. The group tables show the working for the floor and the walls.

Check lot (shade) numbers on every box of the same tile.

Trim pieces — bullnose, pencil liner or metal edge — are sold separately. Measure the exposed edges of the surround to order them.

Assumptions

  • Rectangular floor and walls. Window openings and niches are not deducted — the spare tile usually covers niche returns.
  • Shower floor (pan) tile isn't included. It's usually a mosaic; estimate it separately with the Tile Calculator.
  • Grout is estimated from joint volume at the tile thickness. Joints under ⅛ in take unsanded grout, wider joints sanded.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Shower walls and pans need a continuous waterproofing system. If you're not sure how to build one, this is the part to hire out.
  • Tile on a bathroom floor over wood joists needs a stiff enough subfloor; cracked grout near the toilet is the usual sign it isn't.

Frequently asked questions

How much tile do I need for a tub surround?

A standard 5 ft × 30 in tub tiled 6 ft high has 60 sq ft of wall. In 3 × 6 in subway with 1/16 in joints that's 512 tiles with 10% waste.

How high should shower tile go?

At least to the showerhead, usually 6 ft above the tub or about 7 ft from a shower floor. Many people tile to the ceiling for a cleaner look — enter that height instead.

Can I use the same tile on the floor and walls?

Yes, if it's rated for floors. Enter the same size in both sections. Floor tile needs a slip-resistance rating; most glossy wall tile isn't suitable underfoot.

Do I tile under the vanity?

Not under a built-in vanity, but do tile under a freestanding or wall-hung one. Measure the floor accordingly.

More flooring & tile calculators

All flooring & tile