How to measure
- Measure each room wall to wall at the longest and widest points. Add closets and hallways as separate rooms.
- Read the coverage per box from the label — laminate is usually 18–24 sq ft per box.
- Check whether the planks have pre-attached pad. If so, turn underlayment off (you may still need a vapor barrier on concrete).
- Decide on the layout: straight lays use about 10% waste, diagonal 15%.
How the laminate flooring calculation works
Floor area = Σ (length × width) Boxes = floor area × (1 + waste %) ÷ coverage per box, rounded up Underlayment = floor area × 1.05 ÷ roll coverage, rounded up Quarter-round = (perimeter − 3 ft per room) × 1.1, in 8 ft lengths
Laminate floats over the subfloor and needs a gap of about ⅜ in at every wall to expand. Quarter-round or new baseboard covers that gap, so trim follows the room perimeter less the doorways.
Underlayment rolls are laid edge to edge, not overlapped, so they follow the floor area plus a little for trimming.
Rooms are added before rounding boxes, so leftover planks in one room count toward the next.
Worked example
A 16 × 12 ft living room in laminate at 22 sq ft per box, straight lay, with 100 sq ft underlayment rolls.
- Floor area: 16 × 12 = 192 sq ft
- With 10% waste: 192 × 1.1 = 211.2 sq ft
- Boxes: 211.2 ÷ 22 = 9.6 → 10 boxes (220 sq ft)
- Underlayment: 192 × 1.05 = 201.6 ÷ 100 → 3 rolls
- Quarter-round: (56 − 3) × 1.1 = 58.3 ft → 8 lengths of 8 ft
Buy 10 boxes of laminate, 3 rolls of underlayment and 8 lengths of quarter-round.
How much extra to allow
Laminate offcuts from one row can often start the next, which keeps straight-lay waste near 10%. Long planks in short rooms and diagonal layouts waste more.
| Situation | Allow |
|---|---|
| Large, square rooms, straight lay | 5–7% |
| Typical rooms, straight lay | 10% |
| Diagonal layout or many corners | 15% |
| Herringbone laminate | 20% |
Reading your result
Buy the highlighted box count, all from the same lot.
Let the boxes acclimate in the room for 48 hours before installing, flat and unopened.
Keep an unopened box for repairs — laminate patterns are discontinued quickly.
Assumptions
- Rectangular rooms with one 3 ft doorway each (no trim across doorways).
- Coverage per box is the net installed area printed on the label.
- Underlayment rolls butt together with 5% extra for trimming.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Laminate isn't suitable for bathrooms or areas with standing water unless it's rated waterproof. Check the warranty before installing in kitchens and laundries.
- Uneven subfloors (more than about 3/16 in over 10 ft) need levelling first, or joints will separate.
Frequently asked questions
How many boxes of laminate do I need for a 12 × 12 room?
144 sq ft plus 10% waste is 158.4 sq ft. At 22 sq ft per box that's 7.2, so buy 8 boxes.
Do I need underlayment under laminate?
Yes, unless the planks have it attached. Over concrete you also need a vapor barrier — many underlayments include one.
Can I reuse my baseboards?
Yes. Leave them in place and cover the expansion gap with quarter-round, or remove and reinstall them slightly higher so they cover the gap on their own.
Which way should laminate run?
Usually parallel to the longest wall or toward the main window. The direction doesn't change the box count much on a straight lay.