Skip to content
MeasureToBuy

Vinyl Flooring Calculator

Estimate luxury vinyl plank (LVP) or tile in boxes, or sheet vinyl as a length cut from a 12 ft (or 4 m) roll. Enter each room and pick the vinyl type.

Measurements

Vinyl type

Sold in boxes

Waste allowance

Cuts at walls, offcuts and the occasional damaged board. Use more for small or irregular rooms.

Printed on the box label.

Your estimate

You need 9 boxes of vinyl plank.

192 sq ft of floor plus 10% waste = 211 sq ft, in boxes of 24 sq ft.

Floor area
192 sq ft
Waste allowance
10%
Area to cover with waste
211 sq ft
Coverage per box
24 sq ft
Boxes to buy
9 boxes
Area purchased24 sq ft spare after install
216 sq ft
  • Your last box will be almost fully used. Consider one extra box for future repairs.
Floor plan
16 ft12 ftLIVING ROOM
Area = length × width for each room, added together. Lines show plank courses; cut pieces at the walls are where waste comes from.

Next step

Estimate the cost

Add your price per square foot or per box, plus trim.

Estimate flooring cost

How to measure

  1. Measure each room wall to wall at the longest and widest points. Add closets and bathrooms as separate rooms.
  2. For plank or tile, read the coverage per box from the label — typically 20–30 sq ft.
  3. For sheet vinyl, check the roll width with the store. 12 ft is standard in the US, 4 m in metric markets.
  4. Sheet vinyl is cleanest with no seams: note which rooms are wider than the roll.

How the vinyl flooring calculation works

Plank:  boxes = floor area × (1 + waste %) ÷ coverage per box, rounded up
Sheet:  strips = shorter wall ÷ roll width, rounded up
        length = strips × (longer wall + 3 in at each end)
        area bought = length × roll width

Vinyl plank is counted like any boxed flooring: floor area plus waste, rounded up to whole boxes.

Sheet vinyl is cut from a roll, so you buy a length, not boxes. The calculator runs strips along the longer wall and adds 3 in at each end for trimming. A room wider than the roll needs a second strip and a seam.

Worked example

A 16 × 12 ft kitchen, first as vinyl plank at 24 sq ft per box with 10% waste, then as sheet vinyl from a 12 ft roll.

  1. Floor area: 16 × 12 = 192 sq ft
  2. Plank: 192 × 1.1 = 211.2 ÷ 24 = 8.8 → 9 boxes (216 sq ft)
  3. Sheet: 12 ft wall ÷ 12 ft roll = 1 strip, no seam
  4. Sheet length: 16 ft + 3 in + 3 in = 16.5 ft → 198 sq ft bought

Buy 9 boxes of plank, or 16 ft 6 in of 12 ft-wide sheet vinyl. With plank the last box is almost fully used, so a tenth box is worth considering.

How much extra to allow

Plank waste follows the layout. Sheet vinyl has no waste percentage — the roll width decides it.

SituationAllow
Plank, straight lay10%
Plank, diagonal or many corners15%
Sheet vinyl, room narrower than the rollRoll width × trim — usually 3–15%

Reading your result

For plank, buy the highlighted box count from a single lot.

For sheet vinyl, the store cuts the length shown off the roll. Ask them to roll it face-out to avoid creases.

If a room needs a seam, plan it away from the sink, dishwasher and doorways.

Assumptions

  • Rectangular rooms. Split L-shapes into rectangles.
  • Vinyl plank with attached pad needs no separate underlayment; floating plank still needs the expansion gap at walls.
  • Sheet strips are cut at full roll width with 3 in (75 mm) trim at each end.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Glue-down sheet vinyl and seam welding are best left to an installer.
  • Vinyl over old resilient flooring may contain asbestos in homes built before 1980. Test before removing the old floor.

Frequently asked questions

How many boxes of vinyl plank do I need for a 12 × 12 room?

144 sq ft plus 10% waste is 158.4 sq ft. At 24 sq ft per box that's 6.6, so buy 7 boxes.

Do I need underlayment under vinyl plank?

Not if the planks have attached pad. Over concrete, check whether the manufacturer requires a vapor barrier.

How is sheet vinyl sold?

By the running foot (or metre) off a 12 ft or 4 m roll, often priced per square foot or square yard of the piece cut.

Is vinyl plank waterproof?

Most rigid-core LVP is waterproof on top, but water can still get under it at the edges. Seal around tubs and leave the expansion gap.

More flooring & tile calculators

All flooring & tile