How to measure
- Measure the area you're tiling: floor length × width or wall width × height.
- Choose the trowel notch you'll use. Larger tiles generally need larger notches to get full contact.
- Check contact by lifting a freshly set tile: the back should be covered at least 80% (95% in wet areas).
How the thinset calculation works
Bags = area × (1 + waste) ÷ coverage per 50 lb bag
A trowel's notches leave ridges of mortar; a bigger notch leaves more mortar per square foot. Custom Building Products' VersaBond lists 90–100 sq ft per 50 lb bag with a ¼ × ¼ in square notch, 60–67 with ¼ × ⅜ in, 42–47 with ½ × ½ in, and 34–38 with a ¾ in U-notch held at 45°.
The calculator uses the low end of each range.
Worked example
A 300 sq ft floor with a ¼ × ¼ in notch and 10% extra.
- Area with extra: 300 × 1.10 = 330 sq ft
- Bags: 330 ÷ 90 = 3.7 → 4 bags
Buy 4 bags of 50 lb thinset.
How much extra to allow
Some mortar skins over in the bucket, and back-buttering large tiles adds more. 10% covers most floors.
| Situation | Allow |
|---|---|
| Small and medium tile, flat floor | 10% |
| Large-format tile, back-buttered | 15%+ |
Reading your result
Bags to buy is the shopping list. Unopened bags can usually be returned, so round up.
Mix in small batches and respect the pot life on the bag.
Assumptions
- Coverage from the Custom VersaBond data (low end). Other mortars, especially large-and-heavy-tile mortars, list different figures — check the bag.
- A flat substrate. Dips and humps are filled with mortar and use more.
- The extra allowance is a rule of thumb.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Tile over wood subfloors, heated floors, waterproofing membranes or exterior slabs has specific mortar requirements — follow the membrane or tile manufacturer's system.
Frequently asked questions
How many square feet does a bag of thinset cover?
It depends on the notch. Custom VersaBond lists 90–100 sq ft per 50 lb bag with a ¼ × ¼ in square notch, 60–67 with ¼ × ⅜ in and 42–47 with ½ × ½ in.
What size trowel should I use for 12 × 24 tile?
There's no fixed rule in the ANSI standards — use the notch that gives at least 80% contact (95% in wet areas). For 12 × 24 in tile that's often ½ in or larger; lift a tile to check.
How much thinset coverage does tile need?
At least 80% contact in dry areas and 95% in wet areas and outdoors, with all edges supported, according to Custom Building Products and the ANSI A108.5 method.