Skip to content
MeasureToBuy

Tile Cost Calculator

Price a tile job's materials in one place: tile in whole boxes, thinset by trowel size, grout from the joint volume, and cement backer board sheets.

Measurements

Surface

For a wall, enter its height.

⅛ in (3 mm) is common; 1/16 in for rectified tile.

Waste allowance

Cuts at walls, offcuts and the occasional damaged board. Use more for small or irregular rooms.

On the box label. Leave as is if buying loose tiles.

Advanced optionscoverage, sizes, custom values

Used for the grout estimate.

Your prices

Enter what your store charges. Example prices are placeholders, not quotes.

Tile priced
per sq ft
per 50 lb bag
per 25 lb bag
per sheet

Your estimate

Expect to spend about $294.00 on materials.

40 sq ft of floor plus 10% waste.

Area to tile
40 sq ft
Tile size
12 in × 12 in
Tiles to cover the area0.98 tiles per sq ft with joints
40 tiles
Waste allowance
10%
Tiles to buy
44 tiles
Boxes of 1050 sq ft of tile
5 boxes

Layout and grout

Straight gridedge tiles counted whole
8 × 5 tiles
Grout, approximately1 × 25 lb bag
2.5 lb

Material cost

Tile
$200.00
Thinset (1 × 50 lb)
$28.00
Grout (1 × 25 lb)
$24.00
Backer board (3 sheets)
$42.00
Estimated material cost
$294.00
Tile layout
8 ft5 ftTILE 12 in × 12 in · JOINT 0.125 in
8 tiles across × 5 down in a straight lay. Shaded tiles along the edges are cut pieces.

Next step

Tiling a whole bathroom?

Estimate the floor and shower walls at once, each with its own tile size.

Bathroom tile calculator

How to measure

  1. Measure the floor length and width, or a wall's width and height, in feet.
  2. Note the tile size, the grout joint and the tiles per box from the label.
  3. Pick the trowel notch the tile needs: ¼ × ¼ in for small tile, ¼ × ⅜ in for 8–16 in, ½ × ½ in for large-format.
  4. Decide if you need backer board: on most floors over wood and on any wet wall.

How the tile cost calculation works

Tile cost    = boxes × tiles per box × tile area × price per sq ft  (or boxes × price per box)
Thinset bags = area × 1.1 ÷ coverage per 50 lb bag (90 / 65 / 40 sq ft by trowel), rounded up
Grout bags   = grout weight × 1.1 ÷ 25 lb, rounded up
Backer board = area × 1.1 ÷ 15 sq ft per 3 × 5 ft sheet, rounded up
Total        = tile + thinset + grout + backer board

Tile is priced on the boxes you buy, so the tile line is based on whole boxes after waste, not the bare floor area.

Thinset coverage depends on the trowel notch: the bigger the notch, the more mortar each square foot takes. Grout comes from the actual joint volume for your tile size, joint and thickness.

Backer board comes in 3 × 5 ft sheets; 10% extra covers cuts around the edges.

Worked example

An 8 × 5 ft bathroom floor in 12 × 12 in tile at $4 per sq ft, ⅛ in joints, 10 per box, ¼ × ⅜ in trowel, with backer board.

  1. Tile: 44 tiles with waste → 5 boxes × 10 × 1 sq ft × $4 = $200
  2. Thinset: 40 × 1.1 = 44 sq ft ÷ 65 → 1 bag × $28 = $28
  3. Grout: about 2.5 lb → 1 × 25 lb bag × $24 = $24
  4. Backer board: 44 ÷ 15 = 2.9 → 3 sheets × $14 = $42
  5. Total: $200 + $28 + $24 + $42 = $294

Expect about $294 in materials. Prices here are placeholders — enter what your store charges.

How much extra to allow

Waste is bought, so it's in the cost. Diagonal and large-format layouts raise both tile and thinset slightly.

SituationAllow
Straight lay, small or medium tile10%
Diagonal lay15%
Herringbone, or large-format tile in a small room15–20%

Reading your result

The highlighted total is your material budget for this surface. Run it again for walls with their own tile.

On a small job, setting materials can be a third of the cost — a single bag of each is often more than you need, but it's the smallest size sold.

Labor for tile is usually quoted per square foot and varies more with layout and tile size than with the tile price.

Assumptions

  • Prices are user-entered; the defaults are examples only.
  • Thinset coverage per 50 lb bag: about 90 sq ft with a ¼ × ¼ in notch, 65 with ¼ × ⅜ in, 40 with ½ × ½ in. Check your bag.
  • Backer board screws, seam tape, waterproofing, trim and labor are not included.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Showers and wet floors need waterproofing beyond backer board. Budget for a membrane or have a pro build the shower.
  • Large-format tile (24 in and up) needs a flat substrate and often a leveling system — installers charge more for it.

Frequently asked questions

How much does it cost to tile a small bathroom floor?

For 40 sq ft of $4 tile, about $300 in materials including thinset, grout and backer board. Labor is extra.

How many bags of thinset do I need?

About one 50 lb bag per 65 sq ft with a ¼ × ⅜ in notch. Small tile with a ¼ × ¼ in notch goes further; large-format tile with a ½ in notch needs more.

Do I need backer board on a floor?

Over a wood subfloor, yes — cement board or an uncoupling membrane. Over a sound concrete slab you can usually tile directly.

Should I price tile per box or per square foot?

Use whichever the store shows. The calculator gives the same total either way if the two prices agree.

More flooring & tile calculators

All flooring & tile