How to measure
- Measure each room wall to wall at the longest and widest points, and add closets as separate rooms.
- Count doorways where the carpet ends — each needs a transition strip.
- Get prices per square yard (US) or per m² for the carpet, pad and installation. Ask whether the install rate includes tack strip, seam tape and transitions.
- If old carpet or flooring has to come up, ask for the removal and disposal rate separately.
How the carpet cost calculation works
Carpet (sq yd) = strips × strip length × roll width ÷ 9 Pad (sq yd) = floor area × 1.05 ÷ 9 Carpet cost = carpet sq yd × carpet price Pad cost = pad sq yd × pad price Installation = carpet sq yd × install rate Removal = floor sq yd × removal rate Total = sum of the above + supplies
The carpet quantity comes from cutting strips off the roll in whichever direction wastes least. You pay for the full width of every strip, which is why the bill is based on more than the floor area.
Installation is charged on the carpet purchased because that's how most quotes are written. Removal is charged on the floor being cleared.
The cost per square foot of floor at the bottom makes it easy to compare against hard flooring quotes.
Worked example
A 14 × 12 ft bedroom from a 12 ft roll: carpet $30/sq yd, pad $5/sq yd, installation $8/sq yd and $50 for tack strip and a transition.
- Carpet: one 14.5 ft strip × 12 ft = 174 sq ft = 19.3 sq yd → 19.33 × $30 = $580.00
- Pad: 168 × 1.05 = 176.4 sq ft = 19.6 sq yd → $98.00
- Installation: 19.33 × $8 = $154.67
- Supplies: $50.00
- Total: $580 + $98 + $154.67 + $50 = $882.67
Expect to spend about $883, or $5.25 per square foot of floor. These prices are examples only — use your own quotes.
Reading your result
The total is the number to compare against quotes. If a quote is much lower, check whether it's based on floor area rather than the carpet actually cut.
Many stores advertise 'free installation' but charge for pad, removal or transitions. Turn those lines on and off to compare offers on equal terms.
Upgrading the pad changes comfort and carpet life more than its price suggests — it's often the best few dollars in the job.
Assumptions
- Prices are whatever you enter. The defaults are placeholders, not local prices.
- Every strip is bought at full roll width and the trim allowance is 3 in (75 mm) at each end.
- Moving furniture, stairs, floor repairs and sales tax are not included.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Get at least two written quotes that state the square yardage, pad type and what's included.
- Stairs are usually priced per step, not per square yard. Ask for them separately.
Frequently asked questions
How much does it cost to carpet a 12 × 12 room?
About 16.7 sq yd of carpet off a 12 ft roll plus 16.8 sq yd of pad. At $30 carpet, $5 pad and $8 installation per square yard, that's about $717 before supplies.
Is carpet installation priced by square foot or square yard?
Usually by the square yard of carpet installed in the US. Divide by 9 to compare with a per-square-foot price: $9 per sq yd is $1 per sq ft.
Does the price include pad?
Often not. Pad is quoted separately per square yard, and the calculator adds it as its own line.
Why does the estimate use more carpet than my floor area?
Carpet is cut from a 12 ft roll. Strips are paid for at full width, and each strip needs a few inches of trim at both ends.