Skip to content
MeasureToBuy

Solar Panel Calculator

Enter your yearly electricity use and your area's peak sun hours. You'll get the solar system size in kW, the number of panels, the roof space they take and the yearly production to expect.

Solar estimates depend on shading, roof orientation, local incentives and utility rules. Get a site assessment before committing.

Measurements

Your electricity use
kWh

Add up 12 months of bills, or find the yearly total on your utility account.

h

Yearly average for your location: about 3.5 in cloudy northern areas to 6+ in the desert Southwest.

Share of use to cover

Above 100% plans for future loads like an EV or heat pump.

W

Most home panels today are 370–450 W.

Advanced optionscoverage, sizes, custom values
System losses

Inverter, wiring, dirt, heat and some shading. 14% is the standard planning figure.

Your estimate

About 20 panels (8 kW system).

10,800 kWh a year ÷ (4.5 sun hours × 365 × 0.86) = 7.65 kW needed.

Annual use
10,800 kWh
Target production100% of use
10,800 kWh
System size needed
7.65 kW
400 W panels
20 panels
Installed size
8 kW
Estimated productionper year, first year
11,300 kWh
Roof area for panelsabout 18.8 sq ft per panel, before setbacks
377 sq ft
  • Sun hours and losses are averages. An installer will model your actual roof pitch, direction and shading, which can change the size by 10–30%.
  • Fire-code setbacks from ridges and edges, vents and skylights mean the usable roof is smaller than the roof itself.
  • Grid-tied systems need a permit, utility interconnection approval and a licensed installer or electrician.

Next step

When would it pay for itself?

Use the estimated 11,300 kWh a year with an installer's quote to find the break-even year.

Solar payback calculator

Also useful

Check your roof has room

Measure the roof faces that get good sun — south, east or west.

Roof area calculator

How to measure

  1. Add up 12 months of kWh from your bills, or find the annual total in your utility account. If you only know the bill, switch to 'Monthly bill' and enter your rate.
  2. Look up peak sun hours for your location — the daily average of full-strength sunlight over a year. Roughly 3.5 in cloudy northern areas, 4–5 across much of the country, 6 or more in the desert Southwest. Solar maps from your state energy office or NREL list them.
  3. Decide how much of your use to cover. 100% aims to zero out the energy part of the bill; go above 100% if you're adding an EV or heat pump.
  4. Enter the wattage of the panels you're considering — most home panels today are 370–450 W.

How the solar panel calculation works

Target kWh   = annual use × offset %
kWh per kW   = sun hours × 365 × (1 − losses)
System kW    = target kWh ÷ kWh per kW
Panels       = system kW × 1,000 ÷ panel watts, rounded up
Roof area    = panels × 1.75 m² (about 19 sq ft)

Each kilowatt of panels makes about its rated output for every peak sun hour. Multiply by 365 days for a year, then take off system losses — inverter conversion, wiring, dirt, heat and a little shading. 14% is the default loss figure in NREL's PVWatts model, so the panels deliver 86% of their rating.

Dividing the energy you want by what one kW produces gives the system size. Panels come in whole units, so the count rounds up and the installed size ends up slightly above what's needed.

Footprint uses about 1.75 m² (19 sq ft) per panel, typical of a 400 W residential module. Your roof needs more than that once fire-code setbacks and obstructions are allowed for.

Worked example

A home using 10,800 kWh a year in an area with 4.5 peak sun hours, covering 100% with 400 W panels.

  1. kWh per kW: 4.5 × 365 × 0.86 = 1,412.6 kWh a year
  2. System size: 10,800 ÷ 1,412.6 = 7.65 kW
  3. Panels: 7,646 ÷ 400 = 19.1 → 20 panels (8.0 kW)
  4. Production: 8.0 × 1,412.6 = 11,300 kWh a year
  5. Roof area: 20 × 19 sq ft = about 377 sq ft

About 20 panels (8.0 kW). Expect roughly 11,300 kWh in the first year — a little over the target because of rounding up to whole panels.

Reading your result

The highlighted panel count is a planning number for comparing quotes. If an installer proposes a very different size, ask what production they're assuming and why.

Production is first-year output. Panels lose roughly 0.5% a year, so a system sized to exactly 100% today will cover a little less each year.

Covering 100% of kWh doesn't make the bill zero: fixed charges remain, and export credits may be worth less than the retail rate.

Assumptions

  • Panels face roughly south (or east/west with a small penalty) at a typical roof pitch with little shading. North-facing or shaded roofs produce noticeably less.
  • Peak sun hours are a yearly average. Production is higher in summer and lower in winter; net metering rules decide how that evens out on your bill.
  • Roof area is the panels' footprint only; setbacks from ridges and edges usually add 20–40%.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Grid-tied solar needs a building permit, an electrical permit and utility interconnection approval, and is installed by licensed contractors.
  • Have the roof's age and structure checked first — replacing a roof under panels later is expensive. Your main electrical panel may also need an upgrade.

Frequently asked questions

How many solar panels do I need?

Divide your yearly kWh by (sun hours × 365 × 0.86) to get kW, then by the panel size. A home using 10,800 kWh a year with 4.5 sun hours needs about 20 × 400 W panels.

How much electricity does one solar panel produce?

A 400 W panel with 4.5 peak sun hours and 14% losses makes about 0.4 × 4.5 × 365 × 0.86 = 565 kWh a year.

What are peak sun hours?

The number of hours per day the sun would need to shine at full strength (1,000 W per m²) to deliver the day's total sunlight. Five peak sun hours might come from 10 hours of gentler sun.

How much roof space do solar panels need?

About 19 sq ft (1.75 m²) per 400 W panel, so roughly 375 sq ft for 20 panels, plus space for setbacks.

More energy & hvac calculators

All energy & hvac