How to measure
- Find the wattage on the nameplate, the box or the manual. If only amps are listed, switch to 'Amps × volts' — 120 V for ordinary US outlets, 240 V for dryers, ranges and large AC units.
- Estimate the hours it actually draws power each day. Fridges, freezers, heaters and AC cycle on and off, so count running time, not plugged-in time — or use a plug-in energy meter for a week.
- Set the days per week it's used, and enter the rate from your bill.
How the appliance running cost calculation works
kWh per day = watts × hours per day ÷ 1,000 Cost per day = kWh per day × rate Cost per year = cost per day × days per week × 52.14 Cost per month = cost per year ÷ 12
Dividing watts by 1,000 gives kilowatts; multiplying by hours gives kilowatt-hours, the unit you're billed in.
The yearly figure uses 365 ÷ 7 = 52.14 weeks, so an appliance used every day runs 365 days a year. The monthly figure is a twelfth of that.
Worked example
A 1,500 W space heater running 8 hours a day, every day, at $0.17 per kWh.
- Per hour: 1,500 ÷ 1,000 = 1.5 kWh × $0.17 = $0.26
- Per day: 1.5 kWh × 8 h = 12 kWh × $0.17 = $2.04
- Per year: 12 kWh × 365 = 4,380 kWh × $0.17 = $744.60
- Per month: $744.60 ÷ 12 = $62.05
About $62 a month if it really runs flat out for 8 hours. A thermostat that cycles it half the time halves the cost.
Reading your result
The month figure is highlighted because it's the easiest to compare with your bill. Divide it by your typical bill to see the appliance's share.
Common wattages to sanity-check against: LED bulb 9–15 W, laptop 50 W, TV 50–150 W, refrigerator about 150 W averaged over a day, window AC 500–1,200 W, microwave 1,000 W, space heater 1,500 W, clothes dryer 2,000–5,000 W, EV charger 7,000 W.
Heaters and AC are where the money goes. A 1,500 W heater costs as much per hour as a hundred LED bulbs.
Assumptions
- The appliance draws its full rated wattage whenever it's on. Many appliances draw less than the label most of the time.
- Amps × volts gives the maximum (apparent) power. Motors and compressors use somewhat less real power, so this method overestimates them.
- One flat rate per kWh, entered by you. Time-of-use plans charge more at peak hours.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
Frequently asked questions
How much does it cost to run a space heater?
A 1,500 W heater uses 1.5 kWh an hour — about $0.26 an hour at $0.17 per kWh, or $2.04 for 8 hours.
How much does a refrigerator cost to run?
Check the yellow EnergyGuide label, which lists kWh per year. A typical modern fridge uses 400–700 kWh a year, about $70–$120 at $0.17 per kWh.
How do I convert watts to kWh?
Multiply watts by hours and divide by 1,000. A 100 W TV on for 5 hours uses 100 × 5 ÷ 1,000 = 0.5 kWh.
Do appliances use power when switched off?
Many do — standby power for clocks, remotes and chargers is usually 1–5 W each. Enter the standby watts with 24 hours a day to see what it adds up to.