Skip to content
MeasureToBuy

Lighting Calculator

Enter the room's floor area and what the room is used for. You'll get the total lumens of general lighting it needs, how many bulbs or fixtures that takes, and roughly how many watts of LED light.

Measurements

Length × width.

Bulb brightness

60 W equivalent

Your estimate

You need about 2,250 lumens — 3 800 lm bulbs.

15 fc × 150 sq ft of floor.

Floor area
150 sq ft
Target light levelfoot-candles = lumens per sq ft
15 fc
Total lumens
2,250 lm
800 lm bulbs or fixtures
3 bulbs
Approximate LED wattsat about 90 lumens per watt
25 W
  • This sizes general (ambient) light. Add task lighting where you read, cook or shave — under-cabinet lights, a desk lamp, vanity lights.
  • Dark walls and floors, ceilings over 9 ft, and shades or diffusers all absorb light. Add 20–30%, or use dimmable fixtures and go brighter.

Next step

What will the lights cost to run?

About 25 W of LED light. Multiply by hours on to get kWh.

Electricity cost calculator

How to measure

  1. Measure length and width and multiply for the floor area. For an L-shaped room, add the two rectangles.
  2. Pick the room type. Rooms where you read, cook or work need more light than bedrooms and hallways. Choose 'Custom level' to set your own foot-candles or lux.
  3. Choose bulb brightness by lumens, printed on every bulb box. For recessed lights or fixtures, use the fixture's total lumens.

How the lighting calculation works

Lumens  = foot-candles × square feet   (or lux × m²)
Bulbs   = lumens ÷ lumens per bulb, rounded up
LED W   = lumens ÷ 90

A foot-candle is one lumen spread over one square foot, so foot-candles × floor area gives the lumens to install. In metric, lux is lumens per square metre and works the same way.

Target levels are the middle of typical residential ranges: 15 fc for living rooms and bedrooms (10–20), 25 for dining rooms, 35 for kitchens (30–40), 40 for general bathroom light, 50 for home offices and workshops, and 7 for hallways (5–10).

LED bulbs produce about 90 lumens per watt (most fall between 80 and 110), which gives a rough wattage.

Worked example

A 200 sq ft kitchen lit with 1,100-lumen recessed fixtures.

  1. Target: 35 foot-candles for kitchen general lighting
  2. Lumens: 35 × 200 = 7,000 lm
  3. Fixtures: 7,000 ÷ 1,100 = 6.4 → 7 fixtures
  4. LED power: 7,000 ÷ 90 = about 78 W

Plan 7 recessed lights at 1,100 lumens each, then add under-cabinet lights over the counters.

Reading your result

The highlighted bulb count is for even general light. Spread fixtures across the room rather than clustering them.

Dark walls and floors, ceilings over 9 ft, and frosted shades can absorb 20–30% of the light — add that much, or install dimmers and go brighter.

Older eyes need more light. For someone over 60, consider 1.5 to 2 times the result in reading and work areas.

Assumptions

  • Light-colored walls and ceilings and ceilings around 8–9 ft. This simple lumens-per-area method doesn't account for light absorbed by dark finishes, deep trims or shades.
  • General (ambient) lighting only. Task lighting at counters, desks and mirrors is extra.
  • LED efficacy of 90 lumens per watt. Check the box: some bulbs are more efficient, some decorative ones much less.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • New circuits, recessed fixtures in insulated ceilings and bathroom fixtures near showers should be installed by an electrician to code.

Frequently asked questions

How many lumens do I need for a room?

Multiply the floor area by the foot-candles the room needs. A 150 sq ft living room at 15 fc needs about 2,250 lumens — three 800-lumen bulbs.

How many lumens per square foot for a kitchen?

About 30–40 lumens per square foot for general light, plus task lighting under the cabinets.

How many lumens is a 60 W bulb?

About 800 lumens. A 40 W equivalent is about 450, a 75 W about 1,100, and a 100 W about 1,600.

What's the difference between lumens, foot-candles and lux?

Lumens measure the light a bulb gives out. Foot-candles and lux measure how much lands on a surface: one foot-candle is one lumen per square foot, one lux is one lumen per square metre. One foot-candle is about 10.8 lux.

More energy & hvac calculators

All energy & hvac