Skip to content
MeasureToBuy

Paver Calculator

Enter the patio or walkway size and the paver you like. You'll get the pavers to buy with waste, the compacted gravel base, bedding sand, polymeric joint sand, edge restraint and how deep to dig.

Measurements

Patio shape

Measure length × width; add more for L-shapes

What is it for?

Foot traffic

Waste allowance

Rule of thumb for cuts and breakage; curved edges and 45° patterns cut the most.

ICPI minimums: 4–6 in for walks and patios, 6–8 in for driveways. Deeper on clay or in frost areas.

Screeded to 1 in (25 mm).

Advanced optionscoverage, sizes, custom values

2⅜ in (60 mm) for patios and home driveways; 3⅛ in (80 mm) for regular vehicle traffic.

sq ft per 50 lb bag

From your bag: Alliance Gator lists 65–85 sq ft for ⅛–⅜ in joints and 22–42 sq ft for ¾–1¼ in joints.

Sides that butt a house or slab don't need edge restraint.

Your estimate

You need 713 pavers for 144 sq ft, including 10% for cuts.

144 sq ft ÷ 32 sq in per paver = 648 pavers before waste.

Patio area
144 sq ft
Pavers per sq ft
4.5
Pavers before waste
648
Waste allowance
10%
Pavers to buy
713 pavers

Base and sand

Excavation depthbase + bedding + paver
7.4 in
Soil to remove
3.28 cu yd
Compacted base
4 in
Base gravel (crusher run)2.04 cu yd incl. 15% compaction
3.17 tons
Bedding sand0.44 cu yd at 1 in
0.6 tons
Or 50 lb sand bags
24 bags
Polymeric joint sand
3 bags
Edge restraintExposed sides only
48 ft
  • Compact the base in layers no thicker than your plate compactor can handle (ICPI: typically 4–6 in lifts).
  • Buy a few spare pavers from the same batch for future repairs — colour varies between runs.
Section · layers
PAVERS2.375 inBEDDING SAND1 inCOMPACTED BASE4 inGRADECOMPACTED SUBGRADE
Dig to the total depth, compact the soil, then build the base in layers. The highlighted surface is what you buy by the piece or ton.

Next step

Ordering the base stone separately?

The gravel calculator compares stone types and bulk delivery for the same area.

Gravel calculator

Also useful

Planning the whole patio?

Walk through excavation, base, sand, pavers and edging with one shopping list.

Patio planner

How to measure

  1. Measure the finished paved area. Split L-shapes into rectangles and add each one; measure round patios across the middle.
  2. Pick the paver's nominal size from the label (for example 4 × 8 in). Nominal sizes already allow for the joint.
  3. Choose the base depth: the Interlocking Concrete Pavement Institute (ICPI) gives 4–6 in for walks and patios and 6–8 in for driveways, more on clay or in frost areas.
  4. Under Advanced options, enter the sides that butt a house or slab — they don't need edge restraint.

How the paver calculation works

Pavers          = area ÷ paver face area × (1 + waste)
Base gravel     = area × base depth × 1.15, at 1.55 tons per cu yd
Bedding sand    = area × 1 in
Joint sand bags = area ÷ coverage per bag
Dig depth       = base + bedding + paver thickness

Pavers are counted from face area: a 4 × 8 in paver is 32 sq in, so 4.5 pavers cover a square foot. The waste allowance covers cuts at the edges and broken units.

The base is crusher run (crushed stone with fines) compacted in layers, ordered 15% over its compacted volume. Bedding sand is screeded to 1 in on top. Polymeric sand coverage comes from the bag: Alliance Gator lists 65–85 sq ft per 50 lb bag for ⅛–⅜ in joints and 22–42 sq ft for ¾–1¼ in joints.

Worked example

A 12 × 12 ft patio in 4 × 8 in pavers, herringbone (10% waste), on a 4 in base.

  1. Area: 12 × 12 = 144 sq ft
  2. Pavers: 144 × 144 ÷ 32 = 648; × 1.10 = 712.8 → 713 pavers
  3. Base: 144 × 4 ÷ 12 = 48 cu ft × 1.15 = 55.2 cu ft (2.04 cu yd) × 1.55 = 3.17 tons
  4. Bedding sand: 144 × 1 ÷ 12 = 12 cu ft ≈ 1,200 lb → 24 bags of 50 lb
  5. Joint sand: 144 ÷ 65 = 2.2 → 3 bags; edge restraint 48 ft; dig 4 + 1 + 2⅜ = 7⅜ in

Buy 713 pavers, about 3.17 tons of base gravel, 24 bags of sand, 3 bags of polymeric sand and 48 ft of edging, and dig about 7⅜ in deep.

How much extra to allow

Straight running-bond patios with square edges cut the fewest pavers. Herringbone and 45° layouts cut every edge piece, and curves add more.

SituationAllow
Running bond, straight edges5%
Herringbone or basket weave10%
Curves, circles, 45° patterns15%

Reading your result

The highlighted rows are the shopping list. Order base gravel in bulk; bags rarely make sense above a cubic yard.

Dig to the excavation depth, then compact the soil before adding base in layers.

Keep a few spare pavers from the same batch for repairs.

Assumptions

  • Base depths follow ICPI Tech Spec 10 minimums (4 in patios and walks, 6 in driveways). Weak or wet soils and cold climates need more.
  • Crusher run weighs about 1.55 tons per cubic yard and dry sand about 100 lb per cubic foot; supplier figures vary ±10%.
  • Paver thickness defaults to 2⅜ in (60 mm), which ICPI recommends for pedestrian areas and residential driveways.
  • Waste percentages are rules of thumb; ICPI does not publish a waste figure.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Driveways on clay, sites with drainage problems, or pavers over a structure (deck, roof) need a design from a hardscape contractor or engineer.

Frequently asked questions

How many pavers are in a square foot?

Divide 144 by the paver's face area in square inches: 4.5 for 4 × 8 in, about 2.67 for 6 × 9 in, 1 for 12 × 12 in and 0.56 for 16 × 16 in.

How deep should a paver base be?

ICPI's minimum is 4–6 in of compacted aggregate for walks and patios and 6–8 in for driveways. Use the deeper end on clay, poorly drained ground or where the ground freezes.

How much sand goes under pavers?

A 1 in screeded bed of coarse concrete sand. About 12 cu ft (roughly 1,200 lb) per 144 sq ft.

How many bags of polymeric sand do I need?

Check your bag's chart. Alliance Gator, for example, lists 65–85 sq ft per 50 lb bag on 2⅜ in pavers with ⅛–⅜ in joints, and only 22–42 sq ft with ¾–1¼ in joints.

More landscaping & hardscaping calculators

All landscaping & hardscaping