Skip to content
MeasureToBuy

Sand Calculator

Enter the area and depth you want to fill. You'll get sand in cubic yards, tons and 50 lb bags, with a little extra for settling.

Measurements

Measure the area by

Paver bedding 1 in (25 mm); under pools or leveling 2 in (50 mm); sandbox 12 in (300 mm).

Extra for settling

Loose sand compacts and spreads. 10% is typical; 15% for sand that will be tamped.

Your estimate

You need about 0.92 tons of sand (0.68 cu yd).

100 sq ft × 2 in deep = 0.62 cu yd, plus 10% for settling.

Area
100 sq ft
Sand volume
0.62 cu yd
Extra for settling
10%
Volume to order18.3 cu ft
0.68 cu yd
Weightdry sand ≈ 2,700 lb per cu yd
0.92 tons
Or 50 lb bags≈ 0.5 cu ft per bag
37 bags
  • Weights assume dry sand. Damp sand from an open stockpile can weigh 10–20% more per yard, so a ton covers less — ask your supplier how they convert.
  • Bulk yards often have a 1-ton or 1-yard minimum and a delivery charge; bags make sense only for small jobs.

Next step

Add a gravel base

Paver patios sit on 4–6 in of compacted gravel under the sand.

Gravel Calculator

Also useful

Other materials

Convert any area and depth to cubic yards.

Cubic Yards Calculator

How to measure

  1. Measure the length and width of the area, or enter the total area if it's irregular.
  2. Choose a depth: about 1 in for paver bedding, 2 in for leveling under a pool or shed, 12 in for a sandbox.
  3. If the sand will be compacted, add a bit more extra — 15% instead of 10%.

How the sand calculation works

Volume       = area × depth
Order        = volume × (1 + extra)
Cubic yards  = cubic feet ÷ 27
Tons         = cubic yards × 2,700 lb ÷ 2,000
Bags (50 lb) = order weight ÷ 50 lb

Sand fills a flat layer, so the volume is area times depth. The calculator converts the depth from inches to feet for you.

Bulk sand is sold by the ton or cubic yard. Dry sand weighs about 2,700 lb per cubic yard (about 100 lb per cubic foot), so a 50 lb bag holds roughly 0.5 cu ft.

Worked example

A 10 × 10 ft area leveled with 2 in of sand, plus 10% for settling.

  1. Depth in feet: 2 ÷ 12 = 0.167 ft
  2. Volume: 10 × 10 × 0.167 = 16.7 cu ft
  3. With 10% extra: 16.7 × 1.1 = 18.3 cu ft = 0.68 cu yd
  4. Weight: 0.68 × 2,700 = 1,833 lb = 0.92 tons
  5. Or bags: 1,833 ÷ 50 = 36.7 → 37 bags

Order about 0.92 tons (0.68 cu yd) of sand, or 37 bags of 50 lb. Most yards have a 1-ton minimum, so buy a ton.

How much extra to allow

Sand settles and compacts, spills off the edges and fills low spots.

SituationAllow
Loose fill, sandbox5–10%
Leveling or paver bedding, screeded10%
Compacted with a plate tamper15%

Reading your result

Large jobs lead with tons; small jobs lead with bags. Below about half a cubic yard, bags are usually easier than a delivery.

Ask your supplier whether they sell by the ton or the yard, and which conversion they use — moisture changes it.

Assumptions

  • Dry, loose sand at about 2,700 lb per cubic yard (1,600 kg/m³). Damp sand weighs more, so a ton of wet sand covers less.
  • The base underneath is flat. Low spots take extra sand.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

Frequently asked questions

How much does a cubic yard of sand weigh?

About 2,700 lb (1.35 tons) dry. Wet sand can weigh 3,000 lb or more.

How much sand do I need for pavers?

About 1 in of bedding sand over a compacted gravel base. For 100 sq ft that's 8.3 cu ft (0.31 cu yd) — 17 bags of 50 lb, or 19 with 10% extra.

How many bags of sand for a sandbox?

A 5 × 5 ft sandbox filled 12 in deep holds 25 cu ft — about 50 bags of 50 lb, or 0.93 cu yd. Use play sand that's washed and labeled for sandboxes.

How many 50 lb bags of sand are in a ton?

40 bags. A ton covers about 20 cu ft (0.74 cu yd) of dry sand.

More concrete & masonry calculators

All concrete & masonry