How to measure
- Sketch the yard and divide the grass into rectangles. Measure each one's length and width.
- Add round sections by their diameter, and wedge-shaped corners as triangles (base and height measured square to the base).
- Measure beds, patios and paths that sit inside those shapes and enter their total as the area to subtract.
- Check the grass type on your seed bag or ask your garden center which suits your region and sun.
How the lawn area calculation works
Lawn area = Σ (length × width) + Σ π × (diameter ÷ 2)² + Σ (base × height ÷ 2) − excluded Acres = square feet ÷ 43,560 Seed (lb) = lawn area ÷ 1,000 × seeding rate Fertilizer = lawn area ÷ bag coverage, rounded up
Any lawn can be approximated by simple shapes. Add them up, then take away anything inside them that isn't grass.
Seeding rates are per 1,000 sq ft and depend on the grass and whether you're starting from bare soil or thickening an existing lawn. The calculator uses the middle of the extension-service ranges: tall fescue 7 lb new / 4 lb overseeding, Kentucky bluegrass 2.5 / 1.5, perennial ryegrass 7.5 / 4.5, hulled bermuda 1.5 / 1.
Worked example
A 50 × 30 ft back lawn, seeded from scratch with tall fescue.
- Area: 50 × 30 = 1,500 sq ft (0.034 acres)
- Seed: 1,500 ÷ 1,000 × 7 lb = 10.5 lb
- Fertilizer: 1,500 ÷ 5,000 = 0.3 → 1 bag
The lawn is 1,500 sq ft. Buy 10.5 lb of tall fescue seed — in practice a 10 lb bag plus a small one, or a 15 lb bag — and one 5,000 sq ft bag of starter fertilizer.
Reading your result
The highlighted row is seed to buy. Seed is sold in fixed bag sizes, so round up to the bag that covers it.
Use the area for other lawn jobs: sod, top-dressing soil, or comparing quotes for mowing and aeration.
Assumptions
- Seeding rates are midpoints of typical extension-service recommendations; follow the rate on your seed bag if it differs.
- Fertilizer coverage is per application, as printed on the bag.
- Shapes are measured on the flat; slopes have slightly more surface area.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- For large or very irregular properties, a surveyor's plat or a satellite measuring tool is faster and more accurate than a tape.
Frequently asked questions
How do I calculate the square footage of my yard?
Split it into rectangles, circles and triangles, find each area, add them, then subtract the house footprint, beds and paving that sit inside.
How much grass seed do I need per 1,000 sq ft?
It depends on the grass: about 6–8 lb of tall fescue, 2–3 lb of Kentucky bluegrass, 5–10 lb of perennial ryegrass, or 1–2 lb of hulled bermuda for a new lawn. Overseeding uses roughly half.
How many square feet are in an acre?
43,560 sq ft. A typical suburban lawn of 5,000–10,000 sq ft is about ⅛ to ¼ acre.
How many bags of fertilizer do I need?
Divide the lawn area by the coverage on the bag and round up. A 5,000 sq ft bag covers a 4,000 sq ft lawn once with a little left over.