How to measure
- Measure the length and width of each area to be sodded. Split irregular lawns into rectangles, or use the Lawn Area Calculator and enter the total.
- Ask your grower for their piece size and how much one pallet covers — usually 400–500 sq ft.
- If you're adding topsoil first, decide the depth: 2–4 in over compacted or poor soil.
How the sod calculation works
Sod to cover = lawn area × (1 + waste %) Pieces = sod to cover ÷ piece area, rounded up Pallets = sod to cover ÷ pallet coverage, rounded up Topsoil = lawn area × depth
Sod is cut to fit at every edge, bed and path, so add 5% for simple rectangles and 10% for curved beds and lots of obstacles.
Growers sell by the pallet and often by the piece. A 2 × 5 ft roll covers 10 sq ft; a 16 × 24 in slab covers 2.67 sq ft.
Worked example
A 40 × 25 ft front lawn, 2 × 5 ft rolls, 450 sq ft per pallet, 5% waste.
- Lawn area: 40 × 25 = 1,000 sq ft
- With 5% waste: 1,000 × 1.05 = 1,050 sq ft
- Rolls: 1,050 ÷ 10 = 105 rolls
- Pallets: 1,050 ÷ 450 = 2.33 → 3 pallets
Order 3 pallets, or 2 pallets plus 15 loose rolls if your grower sells them — 105 rolls in total.
How much extra to allow
Waste comes from trimming pieces at edges and around beds, trees and paths.
| Situation | Allow |
|---|---|
| Open rectangular lawn | 5% |
| Curved beds, trees, many edges | 10% |
Reading your result
The highlighted row is pallets to order. If the last pallet is mostly unused, ask about buying loose pieces instead.
Order sod for the day you'll lay it. It deteriorates within a day or two on the pallet, especially in heat.
Assumptions
- Piece sizes are the grower's nominal dimensions; actual pieces vary slightly.
- Pallet coverage defaults to 450 sq ft (40 m²). Change it under Advanced options to match your supplier.
- Topsoil volume is before settling. Use the Topsoil Calculator for tons, bags and a settling allowance.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Large lawns, slopes steeper than about 3:1, or yards with drainage problems are worth a landscaper's grading and installation.
Frequently asked questions
How much does a pallet of sod cover?
Usually 400–500 sq ft, most often 450 sq ft. It varies by grower and grass type.
How many rolls of sod are on a pallet?
About 45 rolls of 2 × 5 ft, or 150–170 slabs of 16 × 24 in, depending on the farm.
Do I need topsoil under sod?
If your soil is compacted, clay or full of debris, 2–4 in of topsoil gives new roots a good start. Over decent soil, tilling and raking may be enough.
How much extra sod should I order?
5% for simple rectangles, 10% for curvy layouts with beds and trees.