How to measure
- Measure the length and width of each area to cover. Split irregular areas into rectangles, or enter a known area.
- Choose the depth: 4–6 in for a new lawn or planting bed, about 1 in to top-dress an existing lawn.
- If you're filling low spots, measure the average depth of the dip rather than the deepest point.
How the topsoil calculation works
Volume = area × depth To buy = volume × (1 + settling %) Cubic yards = cubic feet ÷ 27 Weight ≈ cubic yards × 1.05 tons
Loose topsoil settles after it's spread, raked and watered, so the calculator adds a settling allowance — 10% is typical, 15–20% for deep fills.
Suppliers sell bulk soil by the cubic yard but trucks are rated by weight. Moist screened topsoil weighs about 2,000–2,200 lb per cubic yard; the estimate uses 2,100 lb (1.05 tons).
Worked example
A 20 × 10 ft area for a new lawn, 4 in deep, with 10% for settling.
- Area: 20 × 10 = 200 sq ft
- Volume: 200 × (4 ÷ 12) = 66.7 cu ft = 2.47 cu yd
- With 10% settling: 2.47 × 1.1 = 2.72 cu yd
- Weight: 2.72 × 1.05 = 2.85 tons
- Bulk order rounded up to the next ½ yard: 3 cu yd
Order 3 cubic yards of screened topsoil — about 2.85 tons. The same amount in bags would be 98 bags of 0.75 cu ft.
How much extra to allow
Settling is the allowance that matters for soil: fluffy delivered soil compacts once it's walked on and watered.
| Situation | Allow |
|---|---|
| Top-dressing a lawn (1 in) | 0–10% |
| New lawn or bed (4–6 in) | 10–15% |
| Filling low spots or raised areas | 15–20% |
Reading your result
The highlighted row is the order: bulk cubic yards for most jobs, bags only for top-dressing or small beds.
Use the weight before hauling it yourself — a cubic yard can exceed a half-ton pickup's payload.
Ask whether the soil is screened. Unscreened topsoil is cheaper but full of stones and roots.
Assumptions
- Density of 1.05 short tons per cubic yard for moist screened topsoil. Wet soil can weigh 20–30% more; dry sandy loam less.
- Bags hold the volume printed on them: 0.75 cu ft (about 40 lb) or 1 cu ft in the US, 25 or 40 L in metric markets.
- Bulk orders round up to ½ cubic yard (0.25 m³).
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Regrading next to a house, fixing drainage, or building up more than a foot of fill should be planned with a landscaper — soil against siding or sloping toward the foundation causes water damage.
Frequently asked questions
How much topsoil do I need for a new lawn?
Spread 4–6 in. For 1,000 sq ft at 4 in that's 12.3 cubic yards before settling, about 13.6 yards with 10% extra.
How much does a yard of topsoil weigh?
About 2,000–2,200 lb (1–1.1 tons) when moist. Wet soil after rain can be heavier.
How many bags of topsoil make a yard?
27 bags of 1 cu ft, or 36 bags of 0.75 cu ft.
How much topsoil to top-dress a lawn?
About ¼ to ½ in, up to 1 in to level dips. At ½ in, 1,000 sq ft needs about 1.5 cubic yards.