How to measure
- Measure the area to pave. Split irregular shapes into rectangles and circles.
- Choose the stone thickness you're buying — thinner stone covers more area per ton.
- If your stone yard quotes a coverage figure, choose "Supplier's figure" and enter it.
- For stepping stones set into soil, set the base and sand to 0.
How the flagstone calculation works
Stone (tons) = area × (1 + waste) ÷ coverage per ton Base gravel = area × base depth × 1.15 Sand bed = area × sand depth
Flagstone is irregular, so it's sold by weight. Coverage per ton depends on thickness: Select Stone's product guide lists 130–150 sq ft per ton for ⅝–1 in stone, 90–100 sq ft for 1–1½ in, 80 sq ft for 1–2 in patio flagstone and 70–80 sq ft for 1½–2½ in.
The calculator uses the low end of each range, so you order enough even with tight joints.
Worked example
A 12 × 10 ft patio in 1–1½ in flagstone with 10% waste, on 4 in of gravel and 1 in of sand.
- Area: 12 × 10 = 120 sq ft; with 10% = 132 sq ft
- Stone: 132 ÷ 90 = 1.47 tons
- Base: 120 × 4 ÷ 12 = 40 cu ft × 1.15 = 46 cu ft (1.70 cu yd) × 1.55 = 2.64 tons
- Sand: 120 × 1 ÷ 12 = 10 cu ft ≈ 0.5 ton
Order about 1.47 tons of flagstone, 2.64 tons of base gravel and half a ton of sand.
How much extra to allow
Flagstone pieces are trimmed to fit their neighbours and edges, and some break. Larger pieces and a looser joint pattern waste less.
| Situation | Allow |
|---|---|
| Wide joints, natural edges | 5% |
| Typical patio | 10% |
| Tight joints, cut straight edges | 15% |
Reading your result
Order the flagstone and base gravel as highlighted. Stone yards often sell by the pallet — ask the pallet weight to convert.
Pick out the largest, flattest pieces for the edges and high-traffic spots first.
Assumptions
- Coverage figures are per short ton (2,000 lb) and come from a stone supplier's product guide; other quarries' stone varies.
- Crusher run base at about 1.55 tons per cubic yard, compacted, ordered 15% over; dry sand at about 100 lb per cubic foot.
- Waste is a rule of thumb for trimming pieces to fit.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
Frequently asked questions
How many square feet does a ton of flagstone cover?
Roughly 130–150 sq ft for ⅝–1 in stone, 90–100 sq ft for 1–1½ in, and 70–80 sq ft for 1½–2½ in, according to one supplier's guide. Ask your yard for their figure.
What thickness of flagstone is best for a patio?
Patio flagstone is commonly sold 1–2 in thick (Select Stone's patio grade, for example). Thicker stone covers fewer square feet per ton but is stiffer and less likely to crack where it isn't fully supported.
Do I need gravel under flagstone?
For a dry-laid patio, yes — a compacted gravel base with a sand or fine-stone setting bed keeps the stones from rocking and settling. Stepping stones in a lawn can be set directly in soil.