Skip to content
MeasureToBuy

How Many Square Feet Does a Gallon of Paint Cover?

Real-world paint coverage per gallon for walls, ceilings, exteriors and primer, and what makes paint go further or run short.

Updated October 7, 2026

The short answer

One gallon of wall paint covers 250–400 sq ft per coat, depending on the product and the surface. For smooth, previously painted interior walls, 350 sq ft per gallon is a sound planning number, and it’s the default our calculators use. In metric, that’s about 32.5 m² per US gallon, or roughly 8.6 m² per litre.

Gallons = paintable area × coats ÷ coverage per gallon

Rough, porous or textured surfaces push you to the low end of the range. Use the number printed on your can when you have it; the Paint Coverage Calculator works from any coverage figure you enter.

Reading the label

Manufacturers print a coverage range, such as “250–400 sq ft per gallon”. The high number assumes a smooth, sealed surface and a coat applied at the recommended thickness. The low number is closer to what you’ll get on rougher or more absorbent surfaces. Thicker, higher-solids paints tend to list lower coverage per gallon, but may hide in fewer coats.

Coverage per gallonMetric equivalentTypical surface
350–400 sq ft32.5–37 m² (8.6–9.8 m²/L)Smooth, previously painted drywall, same colour
300–350 sq ft28–32.5 m² (7.4–8.6 m²/L)Repaint with a colour change, light texture
250–300 sq ft23–28 m² (6.1–7.4 m²/L)Heavy texture, bare plaster, rough siding, masonry

What reduces coverage

Texture

Knockdown, orange peel, popcorn ceilings, stucco and rough-sawn siding all have more real surface than their flat measurements suggest, and paint fills the valleys. Plan on the low end of the label for heavy texture.

Porous surfaces

New drywall, bare plaster, unpainted wood and masonry soak up the first coat. That is why they should be primed first: primer is cheaper per gallon and seals the surface so the finish coats cover as labelled.

Colour changes

Coverage per gallon is about spreading; hide is about how many coats it takes to stop the old colour showing. Going from dark to light, or using deep reds and yellows, often needs an extra coat or a tinted primer. That doubles or triples the paint even though coverage per coat hasn’t changed.

Application method

Brushing and rolling put most of the paint on the wall. Roller and tray losses are small but real, especially on a small job where the roller cover soaks up a meaningful share. Airless sprayers are fast, but some paint drifts away as overspray and sprayed coats tend to go on thicker, so expect noticeably less coverage than the label states. Check the sprayer and paint instructions, and buy extra if you plan to spray.

Exterior conditions

Weathered siding, rough wood and masonry absorb more than interior drywall. The Exterior Paint Calculator accounts for siding type.

Primer coverage

Primer labels list a coverage range like paint, but primer usually goes onto the most absorbent surfaces: new drywall, patched areas, bare wood. Use the low end of the label range for those. On new drywall in a 14 × 12 ft bedroom with 365 sq ft of paintable wall, one coat at 250 sq ft per gallon is 365 ÷ 250 = 1.46 gallons, so buy 2.

Primer isn’t counted as a finish coat. Estimate it separately with the Primer Calculator.

How many coats

  • One coat: refreshing the same colour on walls in good condition, if the paint hides well.
  • Two coats: the normal plan for most repaints and any colour change. Two thinner coats give a more even finish than one heavy coat.
  • Three coats, or primer plus two: big colour changes, deep or low-hide colours, and new drywall.

Worked example

A 14 × 12 ft bedroom with 8 ft ceilings, one door and two windows, two coats.

  • Wall area: 2 × (14 + 12) × 8 = 416 sq ft
  • Openings: one door at 21 sq ft + two windows at 15 sq ft = 51 sq ft
  • Paintable area: 416 − 51 = 365 sq ft
  • Two coats at 350 sq ft per gallon: 365 × 2 ÷ 350 = 2.09 gallons
  • With 10% extra: 2.09 × 1.1 = 2.29 gallons → buy 3 gallons

If the same walls are heavily textured and you use 250 sq ft per gallon, the numbers change: 730 ÷ 250 = 2.92 gallons, × 1.1 = 3.21, so buy 4 gallons. Same room, a whole gallon more, because of the surface. For the ceiling, the area equals the floor: 14 × 12 = 168 sq ft. One coat at 350 sq ft per gallon is 0.48 gallons, so one gallon of ceiling paint is enough. The Ceiling Paint Calculator handles that separately.

Gallons, quarts and 5-gallon buckets

Paint is sold in quarts (¼ gallon), gallons and 5-gallon buckets. Once a job needs about 4 or more gallons of one colour, a bucket is usually simpler and keeps the colour uniform across every wall.

Example: three bedrooms in the same colour with 1,100 sq ft of paintable wall, two coats. That’s 2,200 ÷ 350 = 6.29 gallons, × 1.1 = 6.91, so 7 gallons: one 5-gallon bucket plus two gallons. If you buy separate cans of a tinted colour, pour them together into a larger container and stir before you start (called boxing). Small differences between tinted cans then can’t show up as a line partway along a wall.

Keep the leftover. Label the can with the room, colour name and date; it’s your touch-up supply.

Common mistakes

  • Using floor area instead of wall area. A 14 × 12 room has 168 sq ft of floor but 416 sq ft of wall. The Wall Area Calculator gives the right number.
  • Forgetting the second coat, which doubles the paint.
  • Using the top of the label range on new drywall or textured walls.
  • Rounding room by room when several rooms share a colour. Total the areas first.

Calculate it for your project

Enter your room dimensions, openings and coats in the Paint Calculator. It defaults to 350 sq ft per gallon; change that to the figure on your can for a tighter estimate. For trim and doors, use the Interior Paint Calculator.