Skip to content
MeasureToBuy

How Much Waste to Add for Flooring and Tile

Recommended waste allowances for laminate, vinyl, hardwood and tile by layout and room shape — and why the right number isn't always 10%.

Updated October 7, 2026

The short answer

Add 10% for planks or tile laid straight in an ordinary room, 15% for a diagonal layout or a room with many corners, and 20% or more for herringbone and chevron. Large, open, square rooms laid straight can drop to 5–7%.

Material to buy = floor area × (1 + waste %) ÷ coverage per box, rounded up

The Flooring Calculator applies this for you; the rest of this guide explains how to choose the percentage.

Where waste comes from

Waste isn’t a safety margin you might not use. It’s material that will physically end up in the bin:

  • Cuts at the walls. Every row ends with a cut piece, and every edge row is ripped to width. The offcut is only useful if it’s long or wide enough to start another row.
  • Cuts around obstacles: door casings, cabinets, floor vents, toilets and pipes.
  • Defects. Chipped edges, damaged tongues, warped boards and cracked tiles are normal in any shipment, and you’ll set some aside.
  • Mistakes. A miscut or a board installed the wrong way round happens on most jobs.
  • Pattern and shade blending. With hardwood and stone-look tile, you’ll skip pieces that look wrong next to their neighbours.

Waste by layout

The layout drives waste more than anything else, because it decides how many cuts there are and what angle they’re at.

LayoutWasteWhy
Large square room, straight lay5–7%Few cuts relative to floor area; offcuts start new rows
Typical room, straight lay10%The standard allowance most labels assume
Diagonal (45°) or many corners15%Every edge piece is an angled cut; angled offcuts rarely fit elsewhere
Herringbone or chevron20%+Short pieces, angled cuts at every wall, and the pattern must be centred

If the product’s installation guide recommends a specific allowance, use it. Some herringbone products are sold as left and right pieces in separate boxes, so the allowance has to cover both.

Room size and shape

Cuts happen at the edges, so waste depends on how much edge a room has compared with its area. A large open room has relatively little perimeter for its size; a hallway, bathroom or closet has a lot. That is why the same flooring can need 7% in a big living room and 15% in a small bathroom.

Push the allowance up a step when the room has:

  • A floor area under about 50 sq ft, such as a powder room or closet
  • Long, narrow proportions, like a hallway
  • Angled walls, a bay window, or a kitchen island to cut around
  • Several doorways that each need a transition and casing cut

If you’re flooring several connected rooms in one continuous run, total them first and apply one percentage. Offcuts from one room often start rows in the next.

Plank length and tile size

Planks

Each row’s end cut is reusable only if it meets the minimum length in the installation instructions, both to start the next row and to keep end joints staggered. Long planks in short rooms produce long offcuts that are often usable; long planks in narrow hallways can leave many offcuts that aren’t. Wide planks also waste more when the last row has to be ripped down to a narrow strip.

For laminate, vinyl plank and hardwood, start at 10% and adjust for the room.

Tile

With small tiles, a cut piece is small and the waste per cut is small. With large-format tiles, each cut can discard a large piece, and in a small room most tiles touching a wall are cut. Large tiles in a small bathroom often justify 15% even when laid straight. Tile also breaks during cutting, and some tiles in any box will be chipped. The Tile Calculator lets you enter tile size and grout width, and the Bathroom Tile Calculator handles floors and walls together.

Worked example: a 16 × 12 room

A 16 × 12 ft room, with flooring sold in boxes covering 20 sq ft.

  • Floor area: 16 × 12 = 192 sq ft
LayoutWith wasteBoxesArea bought
Straight, 10%192 × 1.10 = 211.2 sq ft10.56 → 11220 sq ft
Diagonal, 15%192 × 1.15 = 220.8 sq ft11.04 → 12240 sq ft
Herringbone, 20%192 × 1.20 = 230.4 sq ft11.52 → 12240 sq ft

Two things stand out. First, rounding up to whole boxes adds its own margin: 11 boxes give 220 sq ft, which is about 14.6% over the 192 sq ft floor, not 10%. Second, the diagonal estimate lands just over 11 boxes, so it rounds to 12. When a result is that close to a whole box, check the exact coverage on your product label before deciding.

Keeping spare boxes

Plan to finish the job with at least one unopened box. Flooring lines change and colours are discontinued, and new stock rarely matches old stock exactly. A spare box lets you replace a damaged board or a cracked tile years later.

  • Buy everything in one order and check that the lot or batch numbers match.
  • Open and mix boards from several boxes as you go, so colour variation is spread evenly.
  • Ask about the store’s return policy for unopened boxes before you buy a generous allowance.
  • Store the spare flat, indoors, and label it with the room and product.

Common mistakes

  • Using 10% for every job. It’s right for typical rooms laid straight, and too little for diagonal or patterned layouts.
  • Rounding each room separately when the same product runs through several rooms. Add the areas first, then round once.
  • Measuring at the baseboards instead of wall to wall, which under-measures every room. See how to calculate square footage.
  • Forgetting closets and the floor under freestanding appliances.

In metric

The figures above are in US units, as the manufacturers and standards give them. Here they are in metric, converted with the same factors the calculators use. Switch any calculator to m · cm to work in metric from the start.

Figure in this guideUSMetric
Room length, 16 ft16 feet≈ 4.88 m
Room width, 12 ft12 feet≈ 3.66 m
Floor area, 192 sq ft192 square feet≈ 17.8 m²

Calculate it for your project

Enter your rooms, pick the layout and type in the coverage from the box in the Flooring Calculator. For a cost estimate including underlayment and installation, use the Flooring Cost Calculator.