Skip to content
MeasureToBuy

Cubic Yards Explained: Converting Area and Depth to Yards

How to convert length, width and depth into cubic yards for concrete, mulch, soil and gravel — with the inch-to-foot step people forget.

Updated October 7, 2026

The short answer

Multiply length × width × depth, all in feet, to get cubic feet. Then divide by 27, because a cubic yard is 3 ft × 3 ft × 3 ft = 27 cu ft.

Cubic yards = length (ft) × width (ft) × depth (ft) ÷ 27

Depth is the step people get wrong. Bulk materials are spread a few inches deep, so divide inches by 12 first: 3 in is 0.25 ft. A 300 sq ft bed at 3 in deep needs 300 × 0.25 ÷ 27 = 2.78 cubic yards.

The formula, step by step

  1. Find the area in square feet. Length × width for rectangles; split odd shapes as in how to calculate square footage.
  2. Convert depth to feet. Inches ÷ 12. 2 in = 0.167 ft, 4 in = 0.333 ft, 6 in = 0.5 ft.
  3. Multiply area × depth to get cubic feet.
  4. Divide by 27 to get cubic yards.
  5. Round up to the increment your supplier sells, often a half or quarter yard.

In metric it’s simpler: length × width × depth in metres gives cubic metres directly. One cubic yard is 0.765 m³, and one cubic metre is 1.31 cu yd.

Worked examples

Mulch for a garden bed

300 sq ft of beds, 3 in of mulch.

  • Depth: 3 ÷ 12 = 0.25 ft
  • Volume: 300 × 0.25 = 75 cu ft
  • Cubic yards: 75 ÷ 27 = 2.78 cu yd (about 2.1 m³)

Order 3 yards. A round bed 10 ft across at the same depth is 3.1416 × 5² = 78.5 sq ft, × 0.25 = 19.6 cu ft, ÷ 27 = 0.73 cu yd. The Mulch Calculator handles both shapes.

Gravel for a driveway

A 50 × 10 ft driveway topped with 4 in of gravel.

  • Area: 50 × 10 = 500 sq ft
  • Depth: 4 ÷ 12 = 0.333 ft
  • Volume: 500 × 0.333 = 166.7 cu ft
  • Cubic yards: 166.7 ÷ 27 = 6.17 cu yd

Gravel is often sold by the ton, so this one needs a conversion (below). The Gravel Calculator gives both yards and tons.

Concrete for a slab

A 10 × 10 ft slab, 4 in thick.

  • Volume: 10 × 10 × 0.333 = 33.3 cu ft
  • Cubic yards: 33.3 ÷ 27 = 1.23 cu yd

Add waste and round to the next quarter yard for a ready-mix order: 1.23 × 1.1 = 1.36, so order 1.5 yards. The Concrete Calculator does this for slabs, walls, columns and steps. For bagged concrete, see how many bags are in a cubic yard.

What one cubic yard covers

Working backwards: one cubic yard is 27 cu ft, so it covers 27 ÷ depth in feet. At 3 in (0.25 ft) that’s 27 ÷ 0.25 = 108 sq ft.

DepthArea covered by 1 cu ydTypical use
1 in324 sq ftTopdressing a lawn
2 in162 sq ftRefreshing existing mulch, sand bedding
3 in108 sq ftNew mulch beds, decorative stone
4 in81 sq ftGravel paths and driveways, patio slabs
6 in54 sq ftDriveway base, topsoil for new lawns

Cubic yards to tons

Quarries and landscape yards often sell stone, sand and soil by weight. To convert, multiply cubic yards by the material’s density in tons per cubic yard. Density varies with the stone type, particle size and, above all, moisture: wet sand and soil weigh noticeably more than dry. Ask your supplier what conversion they use; the figures below are the planning figures our calculators use.

MaterialApprox. tons per cu yd
Gravel, crushed stoneabout 1.4 (dense crushed stone can run higher)
Sandabout 1.35 dry (more when wet)
Topsoilabout 1.05 dry (more when wet)
Concrete (cured)about 2.0 (150 lb/cu ft × 27)

For the 6.17 cu yd driveway above, that’s about 6.17 × 1.4 = 8.6 tons of gravel before any allowance for compaction. Mulch is much lighter than any of these and is almost always sold by volume. The Sand Calculator and Topsoil Calculator convert to tons as well.

Bags per cubic yard

For small jobs, mulch, soil and stone come in bags labelled in cubic feet.

  • 2 cu ft bags: 27 ÷ 2 = 13.5 bags per cubic yard
  • 3 cu ft bags: 27 ÷ 3 = 9 bags per cubic yard
  • 1.5 cu ft bags: 27 ÷ 1.5 = 18 bags per cubic yard

The 300 sq ft mulch bed needs 75 cu ft: 75 ÷ 2 = 37.5, so 38 bags of 2 cu ft, or 75 ÷ 3 = 25 bags of 3 cu ft. At that size, bulk delivery is usually less handling. For raised beds, the Raised Bed Soil Calculator works in bags directly.

Common mistakes

  • Multiplying by inches. 300 × 3 ÷ 27 = 33.3 cu yd, twelve times the right answer. Divide inches by 12 first.
  • Dividing by 9. Nine converts square feet to square yards. Cubic feet to cubic yards is 27.
  • Ignoring settling and compaction. Loose gravel and soil compact once spread and tamped, so the finished depth is less than the loose depth. Our gravel estimates add 15% for a compacted base; ask your supplier what they recommend.
  • Measuring depth at one spot on uneven ground. Take several readings and use the average.

In metric

The figures above are in US units, as the manufacturers and standards give them. Here they are in metric, converted with the same factors the calculators use. Switch any calculator to m · cm to work in metric from the start.

Figure in this guideUSMetric
One cubic yard1 cubic yard≈ 0.765 m³
Depth, 3 in3 inches≈ 76 mm
Bed area, 300 sq ft300 square feet≈ 27.9 m²
Worked example result2.78 cubic yards≈ 2.13 m³

Calculate it for your project

Enter length, width and depth in any units in the Cubic Yard Calculator to get cubic yards, cubic feet and an estimated weight. For boxes and cylinders in cubic feet, use the Cubic Feet Calculator.