How to measure
- Measure each wall's length and its height from the foundation line to the eaves.
- For each gable end, measure its width at the eaves and its height from the eave line to the peak.
- Add up window and door areas (width × height of each), or estimate about 15 sq ft per window and 21 sq ft per door.
How the siding calculation works
Net area = Σ walls (length × height) + Σ gables (width × height ÷ 2) − openings Squares = net area × (1 + waste) ÷ 100 Vinyl = net area × (1 + waste) ÷ carton coverage Planks = net area × (1 + waste) ÷ (plank length × exposure)
Siding is estimated in squares of 100 sq ft. A gable is a triangle, so it counts half its width × height.
Lap siding covers its exposure, not its full width — an 8¼ in HardiePlank installed at a 7 in exposure on a 12 ft plank covers 7 sq ft. Vinyl double 4 in panels come 24 to a carton, which covers 2 squares.
Worked example
A house with four 40 × 9 ft walls, two 30 ft gables 7½ ft high, 120 sq ft of openings and 10% waste, in 8¼ in fiber-cement planks.
- Walls: 4 × 40 × 9 = 1,440 sq ft; gables: 2 × 30 × 7.5 ÷ 2 = 225 sq ft
- Net: 1,440 + 225 − 120 = 1,545 sq ft; with 10%: 1,699.5 sq ft = 17.0 squares
- Planks: 1,699.5 ÷ (12 × 7 ÷ 12) = 242.8 → 243 planks
- Or vinyl: 1,699.5 ÷ 200 = 8.5 → 9 cartons
Buy 243 HardiePlank planks (or 9 cartons of double 4 in vinyl) — about 17 squares.
How much extra to allow
Cuts at windows, doors, corners and gable angles add up. A plain rectangle wastes little; dormers and many openings waste more.
| Situation | Allow |
|---|---|
| Simple rectangle, few openings | 5–10% |
| Typical house | 10% |
| Many gables, dormers, openings | 15% |
Reading your result
Order the cartons or planks shown, plus accessories by the piece.
Contractors quote by the square — the squares figure lets you compare bids.
Assumptions
- Vinyl carton: 24 double 4 in × 12 ft 6 in panels = 200 sq ft (Georgia-Pacific and Alside listings). Some profiles are 1 square per carton — check yours.
- HardiePlank exposures from Hardie's specification: 6¼ in plank → 5 in, 7¼ in → 6 in, 8¼ in → 7 in, 12 ft lengths.
- Waste is a rule of thumb; trim, corners, J-channel, starter strip and soffit are extra.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Fiber-cement siding is heavy and must be cut with dust control (silica). Re-siding is also the moment to add insulated sheathing and fix the weather barrier; an installer can check flashing at windows and the roof line.
Frequently asked questions
How many squares of siding do I need?
Add wall areas and gable triangles, subtract windows and doors, add about 10% and divide by 100. A 1,545 sq ft net wall area is about 17 squares with waste.
How many pieces of HardiePlank are in a square?
Divide 100 by the plank's coverage. A 12 ft plank at 7 in exposure covers 7 sq ft, so about 14.3 planks per square; at 6 in exposure, 16.7; at 5 in, 20.
How much does a box of vinyl siding cover?
Most double 4 in vinyl comes 24 panels to a carton covering 2 squares (200 sq ft), but some profiles are packed 1 square per carton.