How to measure
- Measure the paved area. Split curves and flares into rectangles and circles and add them up.
- Choose the compacted (rolled) thickness: 2 in is the usual driveway minimum, 3–3½ in for a longer-lasting surface.
- Enter the compacted base depth — 6–8 in of crushed stone for a new driveway, or 0 if you're paving over a sound existing base.
How the asphalt calculation works
Asphalt (lb) = area (sq yd) × thickness (in) × mix weight (lb per sq yd per in) × (1 + waste) Tons = lb ÷ 2,000 Base gravel = area × base depth × 1.15
Asphalt plants sell by the ton, so volume is converted with the mix weight. The Pennsylvania Asphalt Pavement Association's checklist puts typical compacted mix at 108–120 lb per square yard per inch of thickness (144–160 lb per cu ft) and uses 110 in its worked example.
Your supplier's job mix formula gives the exact figure; enter it under Advanced options.
Worked example
A 40 × 12 ft driveway, 3 in compacted, on a 6 in base, with 5% extra.
- Area: 40 × 12 = 480 sq ft = 53.3 sq yd
- Asphalt: 53.3 × 3 × 110 = 17,600 lb × 1.05 = 18,480 lb = 9.24 tons
- Base: 480 × 6 ÷ 12 = 240 cu ft × 1.15 = 276 cu ft (10.2 cu yd) × 1.55 = 15.8 tons
Order about 9.24 tons of asphalt and 15.8 tons of base stone.
Reading your result
Asphalt tons are what you quote with the plant or paver. Most plants have a minimum load, which can make small jobs relatively expensive.
Asphalt is laid hot and must be compacted within minutes, so large areas need a paving crew and roller.
Assumptions
- Mix weight 110 lb per sq yd per inch (≈ 2,350 kg/m³), the middle of the typical 108–120 range.
- Thickness is compacted; loose mix is spread thicker and rolled down.
- Driveway thickness guidance from the Ontario Hot Mix Producers Association driveway guide: 2 in minimum, 2 in base + 1½ in surface course for durability, over 6–8 in of compacted granular base.
- Crusher run base at about 1.55 tons per cubic yard; the waste allowance is a rule of thumb.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Driveways for RVs, delivery trucks or on soft, wet soil need a thicker section and possibly excavation and geotextile; a paving contractor can assess the subgrade. Many towns require a permit for a new curb cut or apron.
Frequently asked questions
How many tons of asphalt do I need for a driveway?
Multiply square yards × compacted inches × about 110 lb, then divide by 2,000. A 480 sq ft driveway at 3 in needs about 8.8 tons before waste.
How thick should an asphalt driveway be?
At least 2 in compacted; 3–3½ in (often a 2 in base course plus a 1½ in surface course) lasts longer, over 6–8 in of compacted crushed stone.
How much does a cubic yard of asphalt weigh?
At 144–160 lb per cu ft, a cubic yard of compacted asphalt weighs about 1.9–2.2 tons.