Skip to content
MeasureToBuy

Pool Volume Calculator

Work out how many gallons your pool holds — rectangular, round or oval, flat or with a shallow and deep end — plus how long it takes to fill and what the water costs.

Chemical dosing should follow the product label for your measured volume. Test water regularly.

Measurements

Pool shape
Advanced optionscoverage, sizes, custom values
gal/min

A garden hose runs about 9–12 gal/min (35–45 L/min).

Your estimate

Your pool holds about 22,023 gallons of water.

512 sq ft of surface × 5.75 ft average depth.

Water volume
22,023 gal
Liters
83,365 L
Cubic feet / meters
2,944 cu ft
Surface areafor covers and solar blankets
512 sq ft
Average depth(shallow + deep) ÷ 2
5.75 ft
Time to fillat 10 gal/min
37 hours
  • About 1.5 days with one hose. Bulk water delivery is often faster for a first fill — check local rules.
  • Use the gallons figure for chemical dosing — most labels give doses per 10,000 gal.
Rectangular pool · long section
32 ft3.5 ft8 ftSHALLOW ENDDEEP ENDAVERAGE DEPTH
Average depth = (3.5 ft + 8 ft) ÷ 2. Depth is drawn larger than scale.

Next step

Sizing a smaller tank?

The aquarium calculator adds water weight and a filled-weight estimate for the stand.

Calculate aquarium volume

Also useful

Other shapes and conversions

Convert any box or cylinder between cubic feet, gallons, liters and cubic meters.

Open the cubic feet calculator

How to measure

  1. Measure the length and width of the water surface (or the diameter of a round pool), inside the walls.
  2. Measure water depth at the shallow end and at the deep end, from the water line to the floor — not to the top of the wall.
  3. Above-ground pool with a flat floor? Turn off 'Shallow and deep end' and enter one water depth.
  4. Oval pool: measure the longest and widest points.

How the pool volume calculation works

Average depth = (shallow + deep) ÷ 2
Rectangle     = length × width × average depth
Round         = π × (diameter ÷ 2)² × average depth
Oval          = π ÷ 4 × length × width × average depth

Gallons       = cubic feet × 7.48
Fill time     = gallons ÷ flow rate (gal/min) ÷ 60

A pool that slopes evenly from shallow to deep holds the same water as a flat pool at the average depth.

An oval is treated as an ellipse: π ÷ 4 (0.785) of the rectangle that encloses it. Pools with straight sides and round ends hold a little more.

A cubic foot holds 7.48 US gallons. A garden hose delivers roughly 9–12 gallons a minute.

Worked example

A 32 × 16 ft in-ground pool, 3½ ft at the shallow end and 8 ft at the deep end, filled with a 10 gal/min hose at $6 per 1,000 gallons.

  1. Average depth: (3.5 + 8) ÷ 2 = 5.75 ft
  2. Volume: 32 × 16 × 5.75 = 2,944 cu ft
  3. Gallons: 2,944 × 7.48 = 22,023 gal
  4. Fill time: 22,023 ÷ 10 ÷ 60 = 37 hours
  5. Water cost: 22.023 × $6 = $132.14

About 22,000 gallons — a day and a half on a hose and roughly $130 of water at that rate.

Reading your result

Use the gallons figure for chemical doses — most products are dosed per 10,000 gallons.

Pump and filter sizing usually aims to turn the whole volume over in about 8 hours. Ask the pool store or check the equipment's rating.

Fill time assumes one hose at a steady rate. Bulk water trucks can fill a pool in hours — some areas require them during restrictions.

Assumptions

  • The floor slopes evenly between the two depths. A pool with a steep hopper holds a little less than the average suggests.
  • Walls are vertical. Sloped walls and wide steps or benches reduce the volume.
  • Gallons are US gallons. Water price is whatever you enter; check whether your utility also charges sewer on fill water.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Draining and refilling an in-ground pool can damage it if groundwater is high. Ask a pool professional before emptying one.
  • Check local rules on filling during water restrictions and on discharging pool water.

Frequently asked questions

How many gallons are in my pool?

Multiply length × width × average depth in feet, then by 7.48. A 32 × 16 ft pool averaging 5.75 ft deep holds about 22,000 gallons.

How many gallons is a 24 ft round above-ground pool?

At 4 ft of water: 3.1416 × 12 × 12 × 4 = 1,810 cu ft, or about 13,500 gallons. At 52 in of water it's about 14,700.

How long does it take to fill a pool with a garden hose?

At about 10 gallons a minute, 600 gallons an hour — so a 22,000 gallon pool takes around 37 hours.

How do I calculate the volume of an oval pool?

Multiply length × width × average depth × 0.785, then by 7.48 for gallons.

More area & volume calculators

All area & volume